554883
2
Zoom out
Zoom in
Previous page
1/2
Next page
GD-06 ALLEGRO GSM dealer 2/2 MHG51302
3.3. Customization of SMS texts and access
codes
The default texts of reporting SMS and incoming SMS
instruction can be modified using the following programming
SMS:
MASTER TXT index, text
index index number according to the following
table
text new text, which will be used in SMS
messages
Basic SMS reports’ texts
Index Default Description
10 P1 Description of P1 input terminal
11 On P1 input terminal is triggered
20 P2 Description of P2 input terminal
21 On P2 input terminal is triggered
30 P3 Description of P3 input terminal
31 On P3 input terminal is triggered
40 P4 Description of P4 input terminal
41 On P4 input terminal is triggered
Basic SMS instructions’ texts
Index Default Description
50 P5 Description of P5 output terminal
60 P6 Description of P6 output terminal
70 RELAY Description of the relay output
100 ON Instruction to switch on an output
101 OFF Instruction to switch off an output
109 USER User access code
110 MASTER Master access code
You can send multiple texts separated by commas and blank
spaces in one programming SMS.
Examples:
a) “MASTER TXT 10, Security system, 11, armed” will
customize the input P1 setting to indicate a security
system’s status. If a corresponding alarm system
output triggers the P1 when arming, then SMS
report “Security system armed” is sent.
b) “MASTER TXT 71, Heating” will modify the remote
SMS instruction to switch on a heating system
connected with the relay output to “Heating on”.
c) “MASTER TXT 110, Big elephant” will change the
master access code to “Big elephant”
4. Operation
After installation of the GD-06 ALLEGRO and programming
of the telephone numbers, the GD-06 is ready for operation.
Triggering of any input P1 to P4 will cause the sending
of a SMS report to the telephones registered in the
positions TEL1 to TEL6.
From a GSM phone, you can send an SMS instruction
to switch on or off the P5 and P6 outputs.
You can also switch the relay on or off by making a
phone call to the GD-06 from a phone registered to
TEL1 or TEL2 memory positions. The GD-06 ALLEGRO
doesn’t answer this call, so you don’t pay any
telecommunication fee for this remote control.
Notes:
1. You can remotely control the GD-06 from any phone:
not only from the ones stored in the memory TEL1-
TEL6. You just have to add the master (default
MASTER) or user (default USER) access code in front
of the instruction.
Example: “MASTER ON P5”
2. The SMS instructions texts are case insensitive. It
means that instruction “ON P5” is equal to “on p5”.
5. Advanced programming
More detailed programming can be accomplished from
Internet using the web page www.gsmlink.cz
. Follow the
product registration instructions to get access to a secure
web page. Use the registration code printed on the warranty
certificate (the code has a form xxxx-xxxxx-xxxx and it is
unique for each system). From the GSMLink, you can
program your GD-06 ALLEGRO easily regardless of where
in the world you are located. The best performance will be
obtained if your SIM card enables GPRS data transmission.
Form the GSMLink server you can:
Check the current status of all inputs and outputs
Control the outputs
Program the GD-06
Change the SMS tetxts (only when GPRS data
connection is enabled)
If you don’t have Internet access, you can also use SMS for
the advanced programming. You can find all details in the
Expert programming manual.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron GD-06 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron GD-06 in the language / languages: English as an attachment in your email.

The manual is 0,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron GD-06

Jablotron GD-06 User Manual - English - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info