554993
7
Zoom out
Zoom in
Previous page
1/9
Next page
2524
ENEN
MZZ56200MZZ56200
ACCESSING MENU OPTIONS OF THE RECEIVER
Press the MENU button on the receiver to enter the menu options. Use the navigating arrows to move
up/down/left/right in the menu, and press the OK button to conrm a selection.
Main Menu
The Main Menu contains 4 submenus:
1. PAIRING – For adding more cameras to the receiver.
NOTE: This option is not available for the Tiny monitor.
2. EV – Adjusts the exposure level of the camera.
3. POWER SAVING – Turns on the receiver
power save mode (when no activity on the camera is
detected, the LCD screen on receiver will switch off).
4. SETTING – Sets the AV output options and
resets the receiver to factory defaults (erases all
congurations).
Pairing Submenu
Function not available for Tiny monitor. The system
comes with a single camera that has already been
paired. When you switch on the receiver and the
camera, you are able to see the video immediately.
ADjUSTING THE RECEIVER VOLUME
The receiver volume can be adjusted by using the
UP/DOWN arrows   while watching the video.
Press the DOWN arrow to decrease the volume
and the UP arrow to increase the volume. When
the volume is set to one bar (lowest setting), the
volume is muted.
The volume strength indicator is shown on
display while the volume is being adjusted and will
disappear 10 seconds after nal setting.
EV Menu
The EV Menu is used to adjust the exposure of the camera.
Use the LEFT and RIGHT arrows to change the bar from darkest (left) to lightest (right). Press the
OK button to accept the setting.
Power Saving Submenu
The Power Saving Menu is used to turn off the LCD
screen at a preset time to save the battery. This
function can be set from 1 minute to up to 10 minutes.
The Cancel option switches this feature off.
When the Power Saving option is on, the LCD screen
would only be switched on by activation by the preset
volume level or by pushing any button on the front
of the receiver.
When the LCD screen is activated by button
pushing, it will turn back to Power Saving mode
after the preset time expires. If it is activated by
sound in the monitored area, it will go back to
a black screen after 5 seconds.
Setting Submenu
The Setting Menu contains 2 submenus:
1. A/V Out – Changes the quality of the image sent
to the A/V receiving device (i.e. TV or monitor).
2. Default – Resets all menu settings to the factory
defaults.
A/V Out Menu
The A/V Out menu option is used to adjust the
resolution quality of the image for TV, monitor etc.
Use the UP and DOWN arrows to select a
resolution, and press OK to accept your option.
NOTE: It is strongly recommended to use the “High
resolution to ensure the best image resolution
on a large screen (default setting).
Default Menu
The Default option is used to reset the receiver to
factory settings – all menu settings will be reset.
Use the UP and DOWN arrows to select YES,
and press OK to accept.
NOTE: Camera pairing will NOT be affected by a
reset.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron CMD6129S Tiny at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron CMD6129S Tiny in the language / languages: English as an attachment in your email.

The manual is 9,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info