555038
10
Zoom out
Zoom in
Previous page
1/16
Next page
6
An example of an SMS reply with a GSM position:
+44603012345 Region: South East England, District: Greater London, Name: Kingston-upon-
Thames. Distance approx 5.4 km. E14*52‘1“@ N48*50‘24“, + -500m 11:35:01, 03.12.08
3) Remote blocking of the car (IMO)
The car is “immobilized” by blocking the immobilization circuit every time the car alarm is set. However,
if the keys are stolen, the car can also be blocked remotely. If you send the “IMO” command to the car
alarm phone number, you will receive a confi rmation SMS. The immobilization circuit will be blocked im-
mediately if the ignition key is off. If the ignition key is on when the car alarm receives the command, the
circuit will be blocked as soon as the ignition is switched off. This will be confi rmed to you by an SMS
message. The unblocking of the car alarm will only be possible via the “UNIMO” SMS command.
Ask the installer whether the IMO circuit has been installed in the car and what it blocks.
Remote access and service www.gsmlink.cz
Both the user and the installer can use the www.gsmlink.cz website to register the car alarm and commu-
nicate with it remotely. The access is secure and protected with a password. The website allows inspec-
tion and control of the car alarm and the changing of phone numbers and texts. The CA-1803 version also
allows the display of the current car position on a map. It is also possible to obtain an extract from the event
memory listing including time information, source, event type and car movement history
1)
.
If you need to change any car alarm settings, you do not usually have to go to your service company.
You just have to make a phone call and the installer can perform remote setting.
More detailed information about the GSMLink application is available at www.jablotron.cz.
1)
only with CA-1803
10
T2711 - Jablotron - Manuál Atho10 10T2711 - Jablotron - Manuál Atho10 10 8.4.2009 13:27:128.4.2009 13:27:12
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron CA-1803BT - reset 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron CA-1803BT - reset 2 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron CA-1803BT - reset 2

Jablotron CA-1803BT - reset 2 Installation Guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info