555037
8
Zoom out
Zoom in
Previous page
1/16
Next page
Signalling
1) Acoustic signalling with the alarm siren
The car alarm informs the user about its status by siren
chirps. The chirps for unsetting, setting and setting with
a triggered input (e.g. open door) can be disabled. Other
chirps cannot be disabled due to their importance.
Warning! If the car alarm has no GSM signal at the time
of setting, it chirps six times. The car alarm is thus unable
to transmit SMS messages and make calls.
2) LED indicator in the car
The LED indicator is used to show
the car alarm status. The table below
describes its individual meanings.
Warning! If the LED indicator starts
ashing quickly after the ignition
is switched off, it indicates that there
is no GSM signal and it will not be able
to send any messages or make
a call in the case of an alarm.
Chirps
Meaning
1x Setting
2x quickly Partial setting
2x Unsetting
3x Unsetting after an alarm
4x Setting with a triggered input
6x quickly GSM network is not available
LED state
Meaning
OFF Unset
Permanently ON A phone call or connecting to a GSM network
Flashes slowly Set
Flashes quickly
GSM network is not available or alarm has been
triggered
Interrupted fl ashing Car blocked (immobilized)
Before switching
the ignition on
Flashing indicates wireless detector activation
After switching
the ignition on
Flashing indicates the number of enrolled cont-
rollers
4
8
T2711 - Jablotron - Manuál Atho8 8T2711 - Jablotron - Manuál Atho8 8 8.4.2009 13:27:128.4.2009 13:27:12
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron CA-1803BT - reset 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron CA-1803BT - reset 1 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron CA-1803BT - reset 1

Jablotron CA-1803BT - reset 1 Installation Guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info