554916

Jablotron Azor GSM Mini Manual

12
Zoom out
Zoom in
Previous page
1/12
Next page
MLO51201 - 12 -
Enrollment of a telephone
The GSM control unit must be switched on and all its indicator lights must be flashing
green.
Call Azor (its SIM card number) from the telephone (A)
As soon as the GSM LED indicator starts flashing red (B), press the GSM control unit
button (C) for a short time.
The GSM LED indicator should confirm call reception by flashing blue.
Azor then plays the voice menu to the telephone (D).
Test the menu functions and end the call.
In order to access the menu repeatedly, just call Azor again (from the same telephone
number).
Tips and specifications
Only one telephone without a hidden number can be enrolled.
When the telephone is being enrolled, Azor must be unset.
Only the first user’s telephone can be enrolled in the above-mentioned way.
You can use the same way to replace the first user’s telephone number with another one.
The originally enrolled telephone number is then deleted (Azor will send an SMS notification
– including the number of the newly set telephone).
Azor should set the language automatically based on your country calling code.
For the setting of other users’ telephones and their locking, see the Settings.
- 13 - MLO51201
Communication test
Call Azor from an enrolled telephone (A).
Press 9 (C) in the voice menu (B).
Detector testing mode should be activated.
Activate the detectors and the RFID tag reader one after another (D).
Test a motion detector by opening and closing its cover.
Test a door-opening detector by opening and closing its cover.
Press the UNSET button to activate the RFID tag reader.
Azor will confirm detector activation with a voice message to the user’s telephone
number.
End the call to finish testing or press # on the phone keypad.
Tips and specifications
The test can start only when Azor is unset
If Azor fails to send a report confirming detector activation, check:
whether the detector batteries have been installed properly.
whether radio communication is shielded by a metal obstacle.
whether the distance between the detector and the GSM control unit is too far (try a
different location).
whether the detector has been enrolled correctly (by connecting to a computer and
checking the registration code).
it is not possible to set the system during test mode and no alarm can be triggered
Azor regularly checks its connection to the detectors and the RFID tag reader. If the connection is lost, a
report is sent to the user (must be set) and information is also stored in the event memory. In such a
case please check the batteries in the detector or RFID tag reader concerned and check the signal level
(it may be influenced e.g. by changes in the room arrangement).
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron Azor GSM Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron Azor GSM Mini in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron Azor GSM Mini

Jablotron Azor GSM Mini User Manual - English - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info