554915
15
Zoom out
Zoom in
Previous page
1/24
Next page
- 15 - MLO51201
Unsetting Azor
Press the UNSET button on the RFID tag reader (A) and scan the RFID tag (B)
The green LED indicator lights up and the reader confirms its unsetting (2 beeps).
Tips and specifications
The system can also be unset via the telephone voice menu.
If you activate a detector prior to unsetting (e.g. when you open the door) a warning tone is
sounded and then AZOR waits silently for unsetting for 30 seconds. If the system is not
unset in time, an alarm is triggered.
If you press the RFID tag reader button in the unset state, a green LED indicator lights up.
If three beeps are sounded during unsetting, there has been an alarm when you were not
present.
In the event of unauthorized manipulation of some of the parts of the system in an unset
state a warning beep is sounded and an SMS tamper report is sent. The SMS report is sent
only on the first occasion of tampering with the device.
If the user has enabled SMS reporting when the system is unset, no report is sent to them if
they unset the system themselves by own remote control or RFID tag. The RFID tag
corresponding to the user (its phone number) must be used.
Alarm
When an alarm is triggered, the system informs the ARC immediately*. It concurrently
activates a siren, sends alarm SMS messages to users and subsequently calls the users.
An alarm can be cancelled by pressing the UNSET button on the reader and scanning a
RFID tag, or by using a telephone and the voice menu.
Tips and specifications
If you receive an alarm call, Azor does not call the other users. If no one receives the alarm
call, Azor tries to call all the users once more.
If you do not cancel the alarm, the siren sounds for 3 minutes and then switches off. Azor
keeps guarding.
If an identical detector triggers an alarm three times in a row (e.g. when you forget to close a
window and the wind moves a curtain in front of the detector), such a detector is bypassed and
other detectors keep guarding. A bypassed detector will be included again by unsetting.
A tamper alarm (unauthorized handling of a detector or GSM control unit) is sent just once.
Besides alarm information, Azor also sends SMS reports when it is switched off or if there is
a failure (e.g. power supply failure exceeding half an hour, low battery in a detector,
communication loss to a detector or RFID tag reader, etc.).
* If guarding by an ARC is arranged
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron AZK PLUS-EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron AZK PLUS-EX in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info