607096
5
Zoom out
Zoom in
Previous page
1/96
Next page
- 8 - - 9 -
Saving from Contacts
Open phone book by pressing
, select required contact, then go to contact options by
pressing
and select assigN Hotkey. If your contact has more numbers you will select
which number to assign as Hotkey and confirm by
.
Flashing Hotkeys are empty. Hotkeys with steady light already have a stored number.
Hotkey LED flashes when the stored contact is calling you.
Hotkey LED shines when you are calling the stored contact.
Slow flashing of
signalizes missed call from the stored contact.
To delete stored contact press
for 5s and confirm by pressing
CONFERENCE CALL
Join up to six people into a conference call easier than ever before. Simply call the first
person and add more callers one after another.
Setting up a conference call
Call the first participant as usual and ask him to wait for a moment. Press
, select
add caller... and select another caller. Confirm by and wait for calls to be established
and joined. Repeat to add more callers.
Private talking during the conference call
You can privately talk to a single caller during a conference call. Press
and select
Private # and choose from a list of all conference callers. To end the private call and get
back to conference, press
and select Join calls.
You can release one or more callers from the conference call in a similar manner. During
a conference call press
, select release # and choose from a list of all conference
callers. You can also ask the other party to simply hang up their receiver.
CALL TRANSFER
The call transfer function allows you to forward the active call to another phone number.
During an incoming call, press
, select traNsfer... and choose contact to transfer the
call to. Confirm by
and wait for a moment. You can always press and select
caNcel to interrupt the transfer and get back to the first caller.
Some of the advanced call functions will not work properly
unless they are supported by your GSM operator.
4. MORE CALLING FEATURES
CALL HISTORY
To see All calls you can press . To see Missed calls press again.
If is flashing you have a missed call. If is flashing too you have missed
call from contact stored under the Hotkey.
CALL WAITING
The call waiting function indicates an incoming call even when another call is in progress.
To use the call waiting function, please check that you have activated
it in the c
alls
s
ettiNgs
.
CALL DIVERT
In case you are leaving for a longer period of time, divert incoming calls to a colleague or
your mobile phone. Press
> settiNgs > calls > call divert to set up.
All calls Diverts all incoming calls.
If busy When someone calls you and you speak to someone else.
If no answer When someone calls you and you do not answer the call for 5 to 30 seconds.
You will set the time when you activate this divert.
If unreachable When someone calls you and the phone is OFF or it has no signal.
Cancel all diverts Cancels all call diverts.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablocom GDP-06 - Essence at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablocom GDP-06 - Essence in the language / languages: English, German, Dutch, Danish, Polish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info