607095

Jablocom GDP-04i Manual

16
Zoom out
Zoom in
Previous page
1/20
Next page
XC_GDP-04i.ENG.MAN.Manual.15.A
- 14 -
Choose

for recording a new voice message.
Call to the GDP-04i RF from another phone. GDP-04i RF
receives the call automa cally. A er 4 beeps it starts
recording. The voice message could be
up to 15 seconds long. If you want a shorter message
press
. The phone than replays the message back.
Press
for saving the voice message.
If you like to check the recorded message, go to the
menu
and press
.
A er pressing the panic bu on or ac va ng the sensor, the emergency messages are sent fi rst. Then phone
calls to the fi rst phone number. When the call is connected, phone plays the voice message twice and than
connects audio to the hands free. When the call is fi nished, the phone calls to all other numbers in the same
way. The length of the call is limited to 5 minutes.
If you press a panic bu on during a ringing incoming call, the phone receives the call to the hands free mode.
Try the emergency func on a er comple ng se ngs.
Pressing the panic bu on during incoming call accepts the call on the handsfree. Phone can be operated by
one wireless bu on both way (making calls, receiving calls).

A wireless relay can be operated via SMS sent to GDP-04i RF or from the phone’s menu. All se ngs are done in the
menu.
If you enter the
menu for the fi rst  me, the phone guides you
thru all necessary se ngs.
To enroll GDP-04i RF into a new wireless relay (for example AC-88) switch the relay into the enrollment mode and
choose
on the phone. The phone sends the enrollment signal immediately.
For changing the output name go to the menu
Use right arrow or green bu on to
change it.
Use
for switching between
and
. If the output is in the
mode, it reacts to the SMS message accordingly. If it is in the
mode, it switches on only for 2 seconds.
For opera ng the outputs send an SMS to the GDP-04i RF phone number.
Syntax of the SMS is:
<Ac on> <Output name> where:
<Ac on> is
for switching on the output,
for switching the output off .
This text cannot be changed and depends on the selected language.
<Output name> is
or
as a default. User can modify the output name.
If you like to switch the output on for the limited me, send an SMS
<Ac on> <Output name> HH:MM:SS
Examples:
ON deviceX Switches on permanently the output PgX of the wireless relay
OFF DEVICEY Switches off permanently the output PgY of the wireless relay
ON DEVICEX 3:00:00 Switches on for 3 hours the output PgX of the wireless relay
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablocom GDP-04i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablocom GDP-04i in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablocom GDP-04i

Jablocom GDP-04i User Manual - English, German, French, Italian, Polish, Spanish, Norwegian - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info