607100

Jablocom EYE-02 Manual

10
Zoom out
Zoom in
Previous page
1/148
Next page
EYE-02.ENG.MAN.User_Manual.23.C
- 8 -
EN
ES
FR
NO
DE
FI
• SHOP
The most powerful prole is SHOP. All detectors are active in this mode,
including the permanent activation of "Motion in Picture" detection. This
prole offers the highest quality of permanent monitoring; consequently it is
the prole with the highest energy consumption.
This prole perfectly suited to places which require temporary monitoring,
such as shops, ofce corridors or reception areas, etc.
The default prole is HOME. To switch prole remotely, use your JabloTool account on www.jablotool.com. You can
also use SMS command PROFILE (for details see chapter 4.3)
3.6 Detectors
The EYE-02 camera integrates a wide range of detectors. This sophisticated solution combines various types of
detectors to enable the user to protect the desired area from a wide range of threats. This chapter briey describes
the individual principles for each detector to ensure they are correctly set.
• Infrared motion detector (PIR)
The Infrared motion detector, or Human Body Detector, is the most common type of professional security system detec-
tors. PIR can detect even very small changes in temperature in front of the camera.
Example: Detecting persons by registering changes of temperature emited by human body.
• Motion-In-Picture detector (MIP)
The key principle behind this detector comes from a professional surveillance camera system. It constantly analyzes
the scene and detects any change in the picture.
A sophisticated digital algorithm provides an excellent resistance to false alarms caused by non-essential changes
in pictures (getting dark, switching on the street lamps, etc).
The user can simply mask-out (hide) a part of a picture in order not to detect changes in this part (masking out the
street trafc, etc.) and set the sensitivity according to the size and speed of change in the picture.
As the DSP method consumes a lot of energy, MIP is usually activated after a WAKE-UP by the PIR detector.
Example: Detecting movement of people or objects in a garage.
• Glass break detector (GBS)
The glass break detector digitally analyses a signal from the microphone and is able to detect the characteristic sound
of the window breaking up to 9 meters away.
The GBS sensor can only be used for indoor installations.
• Door opening detector (DOOR)
Door opening detection is a special type of detection that uses acoustic signal ltering. The detector senses pressure
changes and so it detects opening (or closing) of doors and windows in a room.
The DOOR sensor can be only used for indoor installations.
• Tilt detector (TILT)
The built-in tilt detector can detect tampering or unwanted manipulation with the camera. The detector is active also
in SLEEP mode in all proles except CARE.
Example: Detecting intruder who tilted the camera.
• Touch detector (TOUCH)
The touch detector responds to micro vibrations of camera body caused by touching it by hand or another object.
Example: Detecting intruder who touched the camera.
As touch detectors are very sensitive, they should not be used for outdoor installation to pre-
vent false alarms caused by gusts of wind. Reduction in the touch detector's sensitivity may
also be necessary for indoor installation with usual vibrations in some cases.
• Noise detector (NOISE)
The noise detector uses a microphone to check the surrounding area for any sound above the preset level.
The detectors are optimized for application in rooms with a maximum distance of up to 10 meters.
• Detector conguration
Each detector can be congured to 5 sensitivity levels. Higher sensitivity settings mean that detector is activated more
easily, e.g. a smaller movement will be interpreted as activation.
Camera detectors can be congured to respond to their triggering in severral ways. Any of camera detectors can be
set to make alarm always when the detector is triggered or the detector can be set only to wake up the camera for
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablocom EYE-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablocom EYE-02 in the language / languages: English, German, French, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info