To adjust the free play in a three piece type bottom bracket, loosen the
lockring on the left side by turning it counter-clockwise, then turn the
adjusting cup as required. Re-tighten the lockring taking care not to alter
the cup adjustment.
To disassemble:
Remove the cranks from the axle.1. Remove the left side lockring by turning it counter-clockwise.2. Remove the adjusting cup by turning it counter-clockwise.3. Remove the left ball retainer and slide the axle out of the frame 4. to the left.
Remove the right side fixed cup by turning it counter-clockwise 5. and remove the right ball retainer. Clean and inspect all bearing
surfaces and ball retainers, and replace any damaged parts.
Pack the ball bearing retainers with grease, then re-assemble in
reverse of the above procedure.
Standard Crank Removal
To remove cotterless cranks use the following procedure.
Note that a special tool will be required.
Remove the dust cap with a coin or screwdriver.1. Loosen the flange nut or bolt and washer, and remove.2. Screw the removing tool into the crank and tighten.3. Turn the screw bolt down until the crank comes away from the 4. axle.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Izip Enlightened Series at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.
The manual is 6.51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
