803711
101
Zoom out
Zoom in
Previous page
1/140
Next page
101
Some brakes have a special mechanism which enables you to set
the clearance on either side of the rim using a screwdriver. Brake
pads should finally be adjusted so that the leading edge of the
pad makes first contact with the rim. Some brakes have special
curved washers to allow this, but on less complex models it will be
necessary to apply a little force to the pad and its mounting.
Adjustment - V-Style Brakes
Minor brake adjustment can be made via the barrel cable adjusters
which are located on each brake lever. To adjust, squeeze the
brake pads against the rim, loosen the lock nut, and turn the
adjuster to pull the brake pads closer to, or spread them away from
the rim as required.
Brake pad clearance should be a maximum 2mm from the rim.
When correct, re-tighten the lock nut. If the pads cannot be set
close enough to the rim in this manner, you may have to adjust the
length of the brake cable by loosening the fixing bolt, then pulling or
pushing the cable through the fixing bolt to adjust the length, and
finally re-tightening the fixing bolt.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Izip Enlightened Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.

The manual is 6.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info