Slide front Grip Shift™ assembly over left side of handlebar leaving proper clearance for handlebar grip. If necessary, 1. move the brake lever to accommodate Grip Shift™ and handlebar grip.
Rotate assembly until cable exits beneath brake lever with adequate clearance for brake lever movement.2. Firmly tighten recessed clamp screw. Installation torque should be 20 in.-lbs.3. Slide the two 7/8” plastic washers over handlebar. The washers prevent the grip from interfering with Grip Shift™ 4. rotation.
Slide handlebar grip over handlebar. Thread the cable inner wire through cable housings and frame, and attach to 5. derailleur. Make sure that the cable is in the V groove at the derailleur attachment bolt. If trimming the cable housing is
necessary, be sure to replace the housing end cap.
Adjust indexing.6. Slide rear Grip Shift™ over right side of handlebar and repeat steps 2 - 6. 7. Actuate front and rear brake levers to be certain of proper operation. If Grip Shift™ interferes with brake lever 8. movement, rotate brake lever or Grip Shift™. Check for proper brake lever operation again.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Izip Enlightened Series at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.
The manual is 6.51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
