When checked, the hub bearings of either wheel will require
adjustment if there is any more than slight side play.
Check to make sure neither locknut is loose.1. To adjust, remove wheel from bicycle and loosen the locknut on 2. one side of the hub while holding the bearing cone on the same
side with a flat open end wrench.
Rotate the adjusting cone as needed to eliminate free play.3. Re-tighten the locknut while holding the adjusting cone in 4. position.
Re-check that the wheel can turn freely without excessive side 5. play.
How To Fix a Flat Tire
If you need to repair a tire, follow these steps:
Remove the wheel from the bicycle.1. Deflate the tire completely via the valve. Loosen the tire bead 2. by pushing it inward all the way around.
Press one side of the tire bead up over the edge of the rim. 3. Note: Use plastic tire levers, not a screwdriver, otherwise you
may damage the rim and tire.
Remove the tube, leaving the tire on the rim.4. Locate the leaks and patch using a tube repair kit, carefully 5. following the instructions, or replace the tube. Note: Ensure that
the replacement tube size matches the size stated on the tire
sidewall and that the valve is the correct type for your bicycle.
Match the position of the leak in the tube with the tire to locate 6. the possible cause and mark the location on the tire.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Izip Enlightened Series at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.
The manual is 6.51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
