803711
50
Zoom out
Zoom in
Previous page
1/140
Next page
50
NOTE: Some models of bicycles may be equipped with a stem that has an adjustable angle. In addition to the normal assembly,
these stems will require angling the stem to the desired position, and securely tightening the 6mm Allen bolt located underneath
the stem. Failure to do this may cause loss of steering control.
Tightening/Preloading Aheadset
Stem Installation (Should be assembled on
the bike already)
Insert the compression bolt through the 1. top cap and the stem. Begin threading
into the star nut.
Tighten compression bolt so it removes 2. all play from the fork, but allows the fork
to rotate smoothly.
Align the stem with the front wheel. 3. Tighten the stem clamp bolts to secure
the stem to the steerer tube.
Handlebar Installation
Remove the stem cap bolts and stem 1. cap.
Insert handlebar into the stem cap.2. Tighten the stem cap bolts equally. Note 3. the distance between the stem and stem
cap: It should be equal on the top and
bottom of the stem cap. "A" must be
equal distance.
Installed
by
factory
Compression Bolt
Top Cap
Stem Clamp Bolts
Spacer
Headset Wedge
Bearing Race Bearing Dust Cover
Bearing Retainer
Star Nut
(Inside Steerer Tube)
Upper Headset Cup
Headtube
Lower Headset Cup
Bearing Retainer Bearing Dust Cover
Headset Crown Race
fork
Steerer Tube
Handlebar
Stem Cap
Bolts
Stem Cap
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Izip Enlightened Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.

The manual is 6.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info