515017
9
Zoom out
Zoom in
Previous page
1/20
Next page
16 17
If only SIM 1 card is installed and the current mode is “SIM card 1 only”, the screen will display the name of SIM
card 1 provider only and that “SIM card 2 is off”; if only SIM card 2 is installed, the screen displays in reverse. If
only SIM card1 is installed and the current mode is “two cards on”, the screen will display the name of SIM card 1
provider only and that “Please insert SIM card 2”; if only SIM card 2 is installed, the screen displays in reverse.
Switch off
If you want to shut down the cell phone, please long press ON/OFF key, and after the screen displays the power off
animation, the cell phone will shut down. Please don’t shut down the phone directly by dismantling the battery, and
if you do like this, it is easy to damage SIM card and may cause loss of some information.
Making a call
• Enter the phone number in standby status, and press the calling key to call. If you want to hang up or cancel
the call, please press the hook up/cancel key;When the phone is connected, you can see the holding time on the
screen.
• Use the phonebook to make a call: Search the name/phone number saved in the phonebook, and press the
calling key to call.
• Redial the latest phone number; Press the calling key in standby status to search the latest list of phone number
or name. Roll over to the number or name, then press the calling key.
Adjusting the receiver volume
During a call, you can press side keys to adjust the receiver volume.
Answering a call
When there is a coming call, it will indicate in a mode of ring, vibration, vibration and ring, ring after vibration or
lighting according to the setup of cell phone.
To answer a call, press the calling key.
To reject a call, press on/off key.
If you have applied for calling number identication service, the calling number will show on the screen. If this
number has already stored in the phonebook, the corresponding name of this number then will show on the screen.
If the call is to SIM card 1, “Call to SIM Card 1” will display in front of the number or name.
If the call is to SIM card 2, “Call to SIM Card 2” will display in front of the number or name.
Speed dial
The phone provides 8 speed buttons, and you can dene the phone numbers corresponding to these buttons. So,
as long as you long press [2 to 9] keys in standby status, you can call speedily; [1] key is specially used for the
speed dial of voice mailbox number.
(Note): To speed dial, you have to press and hold on/press a key for 2 seconds and above, and if you haven’t
designated the speed dial function for that key, then you can’t be successful for the call.
Sending DTMF signal
When you have set up the DTMF signal sending function, if you press the digit key and * and # key of the keypad
during the period of conversation, it will be sent out in the form of DTMF signal to the other party. If you don’t start
up this function, you can’t carry out the extension number calling, etc. functions probably.
Call Hold
If you have applied for the value adding of call waiting, the following function menu may appear when you click an
entry during conversation:
• Hold: Temporarily suspend the current conversation, but the conversation channel still under connection.
• End: End the current connection.
• New conversation: Enter the dial interface, and make another call.
• Phonebook: You can enter a phonebook directory.
• Information: You can enter messages directory.
• Record: You can record the current calling contents.
• Background tone: Enable or disable the background tone.
• Mute/resume: You can switch on/off microphone.
• Dual-tone multi-frequency, DTMF: You can set up whether to send out a DTMF signal.
Note: Some menu entries just appear under the specic condition, or they need support from the local network,
such as: “Hold” and “New conversation”, etc., for detail, please consult the network supplier.
Non-response event
When the cell phone has new unread messages and missed call etc. events, the cell phone will have the
corresponding picture or icon prompt, please search these messages in time.
Connecting to voice mailbox
Your cell phone allows you to divert the incoming call to the voice mailbox, then, you will receive a notice
concerning the voice messages (the center number of voice mailbox should be set up properly in advance).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ITT Outlimits K2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ITT Outlimits K2 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ITT Outlimits K2

ITT Outlimits K2 User Manual - German - 22 pages

ITT Outlimits K2 User Manual - Dutch - 21 pages

ITT Outlimits K2 User Manual - French - 24 pages

ITT Outlimits K2 User Manual - Italian - 21 pages

ITT Outlimits K2 User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info