key to set the desired environmental temperature or
to enter the menu (set ambient temp.)
key for setting the power of the stove
(set power)
this indicates the functioning of the fan
OPERATING
The stove has two operating modes:
- MANUAL
In MANUAL operating mode, the water temperature at which
the stove must operate is set independently from the temperatu-
re of the room in which it is installed.
To select MANUAL mode, press the
key (the LED will
light up).
Pressing the key will increase the temperature until the
message ‘MAN’ appears on the display (above 40°).
- AUTOMATIC
In AUTOMATIC mode, it is possible to set the desired tempe-
rature of the room where the stove is installed.
When the desired environmental temperature (SET ROOM
TEMPERATURE) is reached, the stove will automatically
switch to power 1 mode.
To set the desired room temperature, press (the LED turns
on) and the current operating temperature will be displayed,
By means of the key or the key, it is possible to vary
the temperature to the desired level.
Ventilation is always correlated to the power in use, so it can-
not be varied.
INSTRUCTIONS FOR USE
SYNOPTIC PANEL
on/off or con! rm/quit menu key
indicates that the chrono-thermostat has been pro-
grammed for automatic ignition at set times
indicates an alarm condition
indicates the functioning of the pellet-loading motor
indicates functioning spark plug
MENU DESCRIPTION
• To access the menu press the key for 2 seconds (the led
switches off).
Pressing the key or the key scrolls the following
menu:
• To con! rm the desired menu press the key.
• To go back to the previous menu press the key for 3
seconds.
• To exit the menu press the key for 6 seconds.
SWITCH ON/SWITCH OFF
To switch on/switch off the stove, press the key for 3
seconds.
Led on stove on
Led fl ashing stove on or in alarm mode
Led off stove off
M1
Set clock
M2
Set time programme
M3
Adjust vent 1
M4
(does not appear at display in this model)
M5
Language
M6
Stand-by
M7
Screw loading
M8
Stove status
M9
Technical calibrations (TAC)
MA
Type of pellets (TAC)
Mb
Quit