569512

It works SUNW2 Manual

9
Zoom out
Zoom in
Previous page
1/65
Next page
AIR PRESSURE HISTORY BAR CHART
1. The bar chart indicates the air pressure history trend over the last 12 hours in 6 steps: 0h,
-1h, -2h, -3h, -6h and -12h.
2. The “0h” represents the current full hour air pressure recording.
3. The columns represent the “hPa” at specific time.
4. If the bars are rising, it means that the weather is getting better due to the increase of air
pressure.
5. If the bars go down, it means the air pressure has dropped and the weather is expected to
get worse from the present time “0h”.
Remarks: Moving your weather station from one floor of a building to another floor will affect the
accuracy of your weather station, which should operate at the same altitude all the time. If you move
it to a new location, it will take 12-24 hours to stabilise and be accurate again.
Our weather station provides the next 12-24 hours weather forecast. It may not match with the
current weather condition outside.
TEMPERATURE AND HUMIDITY TENDENCY INDICATORS
Appears when the current measured temperature / humidity is 1°C or 5% higher than
the last measurement of temperature and humidity
Appears when the current measured temperature / humidity is 1°C or 5% lower than the
last measurement of temperature and humidity
Appears when the current measured temperature is within +/-1°C or +/-5% from the last
measurement of temperature or humidity in the last 1 hour
TO READ MAXIMUM-MINUMUM INDOOR-OUTDOOR TEMPERATURES, HUMIDITY AND AIR
PRESSURE
Simply press the MEM button to view the maximum indoor-outdoor temperatures and humidity, the
air pressure records with “MAX” icons will appearing on the display. Press again to view the minimum
indoor-outdoor temperatures and humidity and the air pressure records and “MIN” icons appearing on
the display.
When the maximums or minimums are displayed, press and hold the MEM to reset both records and
it will start to record the maximums and minimums again.
IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY
When the outdoor temperature and humidity digits show "---": the wireless transmission has been
interrupted or lost. Press and hold the + / CHANNEL button and your weather station will start to
search for the signal from the transmitter. If you continue to lose the outdoor temperature
and humidity display, which could happen in extreme cold weather, try placing the transmitter in a
different location until you have smooth transmission of temperature / humidity data.
TROUBLESHOOTING
If your weather station clock shows irrelevant information or digits, it maybe affected by electrostatic
discharge or interferences from other devices. Use a sharp object to press RESET on the back of the
weather station. Your unit will be reset to default settings and you will need to set the time, calendar
and alarm time again.
Problem Solution
LCD is blank 1. Press RESET on the main unit.
2. Replace fresh batteries in your weather station.
No Outdoor Temperature and
Humidity is displayed
1. Press and hold MEM on the weather station.
2. Press and hold MEM, then press RESET on the
transmitter.
3. Make sure the correct channel is selected on your
EN.8
Downloaded from www.vandenborre.be
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for It works SUNW2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of It works SUNW2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info