Manual Isomac VIPER-NAPOLISSIMA (page 13 of 32) (English, German, French, Italian, Swedish)

509360

Zoom out

Zoom in

1/32

machine when it is plugged in

! never touch the machine with wet hands or feet

! never touch the hot parts of the machine (bottom of coffee distributor and water/steam

nozzles)

! before performing any routine maintenance make sure the machine is unplugged, with-

out pulling the power cable, or that the main circuit breaker is off

! if the power cable should be damaged and have to be replaced, order a new cable from

the manufacturer and/or its service center

! never immerse the coffee machine in any type of liquid

! do not use detergents or abrasive substances to clean the machine

! do not leave the machine exposed to atmospheric agents

! do not leave the machine within reach of children or people who are not capable of

using it

! keep the coffee maker away from any heat sources

4. INSTRUCTIONS FOR THE USER

4.1 Star

ting the machine

To start the VIPER/NAPOLISSIMA/CAPPUCCINA espresso machine follow the

instructions below:

• open the external packing and take the machine out. Inspect the machine to

ascertain that it is intact and in good condition. Check for the presence of all the

accessories supplied with the machine (see paragraph 1.1)

• position the machine on a flat surface

• remove the cover and take out the water tank (located inside the machine) and

rinse it

• fill the container with clean water, return it to its housing and insert the silicon

tubes. Close the cover on the machine

• plug in the machine

• press the main circuit breaker (1). The main power on light (2) and the coffee light

(4) will go on

erf

orm the follo

wing opera

tions ev

ery time you s

witch the mac

hine on and ev

ery time

you dr

aw steam:

• place a container under the water/steam nozzle (9)

• turn the knob on the water/steam tap (8) counter-clockwise

• press the coffee switch (3). Water will come out of the water/steam nozzle (9)

• press the coffee switch again (3)

• turn the water/steam knob (8) clockwise to close the tap

• wait about 3-4 minutes until the machine is pressurized and the coffee light (4)

goes off

Now the VIPER/NAPOLISSIMA/CAPPUCCINA coffee machine is ready to use

4.2 Preparation of coffee

! Make sure the tank is always full of water

• make sure the machine is pressurized (see paragraph 4.1)

• fill the filter holder, with the one cup filter for one cup only or with the two cup fil

ter for two cups at the same time, and press the coffee slightly with the special

presser

• fit the filter holder in the coffee distribution unit (7) and twist from left to right

to block it

Viper/napolissima/capuccina 9-05-2005 9:29 Pagina 13 (Nero/Process Black pellicola)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Isomac VIPER-NAPOLISSIMA in the language / languages: English, German, French, Italian, Swedish as an attachment in your email.

The manual is 0,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Isomac VIPER-NAPOLISSIMA Manual

Product: