669623

Isomac VENUS PID Manual

27
Zoom out
Zoom in
Previous page
1/56
Next page
27
English
11.4 – STEAM
Steam can be used for frothing the milk to obtain cappuccinos or to warm up beverages.
Attention! Burn risk: at the beginning there might be hot water sprinkling. The hot
water tube might reach high temperatures: do not touch it with hands.
1. Prepare your espresso in big mugs as already specified.
2. Once the machine is ready to make the coffee, position the steam nozzle (6) on the tray (7), open the hot
water/steam knob (4) for a few seconds so that the few drops of water inside the nozzle come out; after a few
second you will get only steam.
3. Close the hot water/steam knob (4).
4. Set the steam lever (14) on the position “I”.
5. After 15-20 seconds, when the led for the correct temperature (14a) goes on, place the mug, filled in for its
half with cold milk, under the sit is confirmed that the water in the boiler has reached the set temperature
IMPORTANT In order to obtain a better cappuccino, make sure that the milk and the mug are cold.
6. Turn slowly the steam knob (4) anticlockwise to make the steam come out.
IMPORTANT More you open the knob, higher will be the steam pressure.
N.B. Do not release steam for more than 60 seconds.
7. Move the mug with circular movements and make sure that the tip of the steam nozzle is slightly immersed in
the milk once the foam will start to grow. Do not make the milk boil.
Once the milk has been properly frothed, turn the knob clockwise to stop the steam and remove the mug. Push
the steam lever (14) on the position “O”.
8. Pout the frothed milk on the coffee. Decorate with cacao, cinnamon, Muscat nuts and then serve.
9. Place an empty cup on the tray without putting the filter holder under the brewing group. Set the coffee lever (14)
on the position “I” and fill the cup with water. Once the cup is full, push the coffee lever (14) on the position “O”.
Now you can make another coffee.
11.5 – HOT WATER
a) Make sure to follow the instructions as per 11.1 “starting of the machine”.
b) Open the knob (4) and push the hot water lever (19) on the position “I”; the steam nozzle (6) pour out
immediately.
c) Fill the cup with the desired water and push the hot water lever (19) on the position “0” and close the knob (4).
d) After filling the cup, make sure that there is still water in the tank (1).
Attention: for the correct machine operating, please do not release steam
longer than 60 seconds.
Attention: water temperature is around 90-95°, be careful not to burn yourself.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Isomac VENUS PID at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Isomac VENUS PID in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info