669624

Isomac Venus II Manual

25
Zoom out
Zoom in
Previous page
1/56
Next page
25
English
11 – USER INSTRUCTIONS
11.1 – STARTING THE MACHINE
VERSION VNS
a) Fill the tank (1) with cold water.
b) Switch the machine on by pushing the on/off lever (13) on the position “I”. The lamp (13a) comes on to
confirm the power supply.
c) Insert the filter holder (8) in the coffee group (5).
d) Open the steam/hot water knob (4).
Place the coffee water lever and the steam lever (15) on the position “I”. Should water comes out of the turbo
steam supply nozzle (6), push the coffee lever and the steam lever (15) on the position “0” and close the knob (4).
e) Please, check the tank water (1) level so to prevent from repeating these operations and from empting water
circuit. In case it happens, repeat all the above mentioned operations by all means.
f) After doing these operations, wait that the machine builds up the operating temperature to make coffee, lamp
(14a) off.
N.B. The lamp reached the correct temperature (14a) will continue to go out and to turn on
automatically during the heating period. After turning on the machine, for the first coffee,
wait about 20 minutes for the ideal heating, while for all subsequent machine will always
be ready.
VERSION VNSPID
a) Fill the tank (1) with cold water.
b) Switch the machine on by pushing the on/off lever (13) on the position “I”. The lamp (13a) comes on to
confirm the power supply.
c) Insert the filter holder (8) in the coffee group (5).
d) Open the steam/hot water knob (4).
Place the coffee water lever and the steam lever (15) on the position “I”.
Should water comes out of the turbo steam supply nozzle (6), push the coffee lever and the steam lever (15) on
the position “0” and close the knob (4).
e) Please, check the tank water (1) level so to prevent from repeating these operations and from empting water
circuit. In case it happens, repeat all the above mentioned operations by all means.
After completing all these operations, leave the machine on.
The Termopid (11) will visualize the degrees inside the boiler and will control the boiler’s heating.
The PID is already set from the producer on 92°C, i.e. the ideal temperature for a good cup of coffee. (If you
want to change the Termopid’s temperature, please follow the instructions written under How to set the temperature
inside the boiler by means of the Termopid).
As soon as the Termopid’s display shows the set temperature and the indicator light (14a) remains on, it is
confirmed that the water in the boiler has reached the set temperature
N.B. The lamp reached the correct temperature (14a) will continue to go out and to turn on
automatically during the heating period. After turning on the machine, for the first coffee,
wait about 20 minutes for the ideal heating, while for all subsequent machine will always
be ready.
SERIE VNSPID
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Isomac Venus II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Isomac Venus II in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info