658894
46
Zoom out
Zoom in
Previous page
1/98
Next page
OPERATION
45
Attaching Implements
CAUTION: Always use POSITION CON-
TROL to attach/detach implements to
provide precise control of hitch.
FIG. 4-17: Back Tractor to implement, centering Trac-
tor with implement hitch frame.
Raise or lower hitch using position control lever, 1,
and align left lower link end with corresponding imple-
ment attaching pin.
Lock the brakes, shut off engine and remove key.
FIG. 4-18: Side ball end of left lower link, 1, over
implement pin and secure with linch-pin.
Adjust height of right lower link using leveling turn-
buckle, 2. Attach and secure right lower link, 3, to
implement with linch-pin.
Attach top link, 4, to top of implement hitch frame
using pin supplied with Tractor. Rotate center barrel
section of top link, to lengthen or shorten it, and level
implement from front to rear.
After the implement is attached, it can be readjusted
for level operation using leveling crank and top link.
Secure all adjustments.
IMPORTANT: With some mounted implements, it
will be necessary to remove drawbar
at rear of Tractor to permit implement
to be raised and lowered without ob-
struction.
Certain implements require minimal side-play. Stabiliz-
ers, 5, at each lower link should be evenly adjusted to
reduce side-play to desirable level. Do not remove all
side-play as lower link damage may result.
NOTE: The amount of side-play (stabilizer loose-
ness) is dependent upon implement and type
of operation.
Normally 50mm of total side movement is de-
sired, 25mm to each side of Tractor centerline.
1
4
5
2
3
1
FIG. 4-17
FIG. 4-18
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info