658894
16
Zoom out
Zoom in
Previous page
1/98
Next page
SAFETY
15
(4) When disconnecting the battery cables, discon-
nect the earth cable (-) first without fail. When
connecting the battery cables, connect the posi-
tive cable (+) first. Disconnecting or connecting in
wrong order may lead to a short circuit or sparks.
TO HANDLE BOOSTER CABLES
When using booster cables, pay attention to the fol-
lowing items for safe operation:
(1) Before connecting cables, remove the vent plugs.
This will lower the force in case of explosion.
(2) Before connecting cables, be sure to stop the en-
gine. Otherwise unexpected accidents may occur.
(3) Use booster cables with sufficient electrical ca-
pacity. A cable of inadequate capacity will cause
generation of heat, which may lead to a fire.
DISMANTLING AND DISPOSAL
When the machine or its parts completes their use-
ful life, consult your ISEKI dealer for dismantling
and disposal. If you try to dismantle and dispose by
yourself, be ware of the necessity of hazards and
safety precautions.
SAFETY DECALS
The labels are stuck on the tractor. You should of
course read the safety instructions in the manual.
But never fail to read the labels on the machine
as well.
The labels should always be clearly seen, that is,
When they have become dirty, wash them with
soap water and wipe off with soft cloth.
If any of them are torn or lost, order new labels
from your dealer. Their codes are mentioned in
“SAFETY DECALS AND THEIR LOCATION.”
A new label should be placed in the same place
where the old one was located.
When sticking on a new label, clean the place to
bubbles trapped under it.d.
When disconnecting battery cords,
disconnect negative cord first.
When connecting battery cords,
connect positive cord first.
FIG. 1-24
FIG. 1-25
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info