658894
12
Zoom out
Zoom in
Previous page
1/98
Next page
SAFETY
11
(7) Use ramps with the same or better specifications
mentioned below. When the machine is equipped
with attachments other than those included in the
specifications mentioned below, ask your Iseki
dealer for advice.
Specifications of the ramps
Length:
more than 4 times the height of the platform of
the truck
Width (effective width): more than 35 cm
Capacity (one ramp): more than 1700 kg
Ramps should have anti-skid surfaces
(8) Hook the ramps securely on the platform of the
tractor with the top of the ramp level with the
platform.
(9) Always prepare for even the worst, by never al-
lowing other persons near the tractor.
(10) Drive the tractor carefully at the moment the trac-
tor moves from the ramps onto the platform, for it
changes angle abruptly.
DURING OPERATION
(1) During operation, never allow other persons in
the vicinity of the tractor, because the tractor itself
or flung pieces may cause injury.
(2) Pay attention to safety around the tractor to avoid
injury to bystanders or damage to property.
Especially when operating with other persons,
use the horn to warn them.
(3) When crossing a ditch or a levee or when pass-
ing through soft land, drive the tractor slowly and
straight so that it does not slip or turn over.
(4) Do not touch dangerous parts such as rotating
parts, moving pars, hot parts (muffler, radiator, or
engine, etc.), or electric parts (battery terminals and
other live parts), or you may be injured seriously.
(5) If you use a trailer, use a proper one which suits
your tractor. Using an improper trailer may cause
serious accidents. Never attempt to haul beyond
the tractor’s capacity. If you have a question,
please consult your Iseki dealer.
Follow strictly the instructions outlined in the
operator’s manual of the mounted or trailed ma-
chinery or trailer, and not to operate the combina-
tion tractor – machine or tractor – trailer unless all
instructions have been followed.
more than 4 times
the height of the platform (h)
FIG. 1-16
FIG. 1-17
FIG. 1-18
FIG. 1-19
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info