664222
149
Zoom out
Zoom in
Previous page
1/231
Next page
147
LUBRIFICATION & ENTRETIEN PÉRIODIQUE - SCHMIERUNG & REGELMÄSSIGE WARTUNG -
SMERING EN REGELMATIG ONDERHOUD
ABB. 92 (TM3200 & TM3240):
1. Befüllen Sie den Kraftstofftank.
2. Kraftstoffhahn (1) in „ON”-Position drehen.
3. Drehen Sie den Zündschalter in die „ON”-Position.
Halten Sie den Schlüssel etwa 10 bis 15 Sekunden in
dieser Stellung, das Kraftstoffsystem wird so
automatisch entlüftet.
HINWEIS: Normalerweise ist eine weitere Entlüftung
aufgrund der laufenden Elektropumpe – wenn
der sich der Anlassschalter auf der
Instrumententafel in „ON“-Stellung befindet –
nicht mehr nötig. Startet der Motor auch nach
einigen Versuchen immer noch nicht, überprüfen
Sie die Kraftstoffpumpensicherungen (siehe
„Elektrik”).
ACHTUNG: Kraftstoff, der aus gelösten
Einspritzleitungen austritt, steht unter hohem
Druck. Schützen Sie beim Anlassen des Motors
Hände und Gesicht. Säubern Sie verschüttet
Kraftstoff nach der Entlüftung.
Handgashebel
ABB. 93: Der Handgashebel sollte jeweils in der Position
verharren, in die er vom Fahrer geschoben wird. Aufgrund
von Verschleiß hält der Hebel nach einiger Zeit unter
Umständen nicht mehr seine Position. In diesem Fall die
Einstellmutter (1) drehen, um die Hebelspannung wie
erforderlich zu erhöhen.
HINWEIS: Zur Einstellung der Hebelspannung die
Lenksäulenverkleidung und die Instrumentenab-
deckung entfernen.
FIG. 92 (TM3200 en TM3240):
1. Vul de brandstoftank.
2. Draai de brandstofkraan (1) in de ON-stand.
3. Draai de startschakelaar in de ON-stand. Hou de
sleutel 10 tot 15 seconden in deze stand. Het
brandstofsysteem wordt automatisch ontlucht.
NOOT: Normaal gezien is verdere ontluchting niet vereist
omdat de elektrische brandstofpomp in werking treedt
als de sleutel in de ON-stand staat. Als de motor na
verschillende pogingen niet wil starten, controleert u
de zekeringen van de brandstofpomp (zie “Elektrisch
systeem”) en doet u het nodige.
OPGELET: De brandstof die uit de
losgeschroefde injectieleidingen spuit, staat
onder druk. Hou handen en gezicht weg als u de
motor wordt gestart. Veeg gemorste brandstof
weg nadat u het brandstofsysteem hebt
ontlucht.
Gashendel
FIG. 93: De gashendel moet altijd in de door de bestuurder
gekozen stand blijven staan. Bij normaal gebruik kan de
wrijving tegen de hendel afnemen waardoor de hendel uit de
gekozen stand kan springen. Draai de afstelmoer (1) aan om
de hendel in de gekozen stand te houden.
NOOT: Om de wrijving van de gashendel aan te passen,
verwijdert u de behuizing van de stuurkolom en het
instrumentenbord zodat u bij de afstelmoer kan.
149


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TM3160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TM3160 in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info