611356
5
Zoom out
Zoom in
Previous page
1/19
Next page
SD card is not properly connected.
Check SD card connectivity in the camera
When WiFi signal is weak or interrupted,
LCD shows 'X' sign in WiFi spot.
Wait for 1~2 minutes until the signal goes back to normal.
Otherwise, please check the environmental condition and
reboot the device.
SD card is connected, but error has occurred in SD card.
Check SD card status, and format the SD card
When format SD card, all data will be deleted
ISAW remote controller uses built in Li-ion battery power.
Recharge the battery with USB cable included.
(※
Please recharge your remote controller before using it the first time.)
Running time: approximately 2 hours ~ 4 hours. (environmental due to power save mode)
Battery recharge time: approximately 1.5 hours.
When the connected camera changes its mode to 'playback',
the RC shows the 'Playback' message.
Press 'MODE' button to go back to video mode.
When the RC is turned off, it shows current s/w version.
Please check s/w version before upgrade.
Description
Function Image
WiFi Inturruption
No SD
SD Error
Playback
Software version
7. LCD Screenplay
8. Recharging Battery
ISAW remote controller is able to upgrade with simply software update.
Please visit www.isawcam.com for the latest firmware upgrade of remote controller.
9. Firmware Upgrade
Remote controller is NOT a waterproof. Do NOT put the remote controller into the water.
Do not disassemble, crush, bend, heat or insert foreign object into the device.
Please recharge your remote controller before using it the first time.
To ensure proper WiFi connection, please keep the distance from the camera less than 25m (80ft)
Please avoid to operate the remote controller in high temperature over 60°C.
Please avoid to operate the remote controller in high humidity environments.
Operation in lower temperature than 0°C will cause low battery runtime.
ISAW is not responsible for incidental or consequential damages relating to or resulting from the use of
this product of any of its parts.
10. Safety Warning
ISAW Remote Controller
USB Cable
User Manual
11. Package Included
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ISAW WIFI REMOTE CONTROLLER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ISAW WIFI REMOTE CONTROLLER in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info