578609

Irox PRO-X2 Manual

27
Zoom out
Zoom in
Previous page
1/33
Next page
27
Maintenance
Changing Batteries
The battery statuses of the sensors are checked every hour. If the low battery indicators
light up, replace the batteries for the corresponding unit immediately.
Changing Batteries for the Main Console Unit
1.Toavoidlosingdataandrecords,connecttheAC/DCadaptortothemainunitrst.
2. Remove the latch at the back and replace all batteries. Do not mix old and new
batteries.
3. Replace the cover.
Changing Batteries for the Remote Sensors
1. Replace the batteries following the setup instructions for the corresponding sensor.
2. When the batteries are properly installed, the sensor will resume sending signals to the
main console unit.
To enforce a search immediately for all remote signals, press and hold DOWN on the
main console unit.
Cleaning
The main console unit and outer casings for the remote sensors can be cleaned with a
damp cloth. Small parts can be cleaned with a cotton tip or pipe-cleaner.
Never use any abrasive cleaning agents and solvents. Do not immerse any units with
electronic parts in water or under running water.
Anemometer
- Check that the wind vane and wind cups can spin freely and are free from dirt, debris or
spider webs.
Rain Sensor
Like all rain gauges, the rain sensor is prone to blockages due to its funnel shape.
Checking and cleaning the rain sensor from time to time will maintain the accuracy of rain
measurements.
- Detach the protective screen and lid. Remove any dirt, leaves or debris by cleaning the
items with soapy water and a damp cloth. Clean small holes and parts with a cotton tips
or pipe-cleaner.
- Look out for spiders or insects that might have crawled into the funnel.
- Also clean the swinging mechanism with a damp cloth.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox PRO-X2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox PRO-X2 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox PRO-X2

Irox PRO-X2 User Manual - German - 39 pages

Irox PRO-X2 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info