578609
14
Zoom out
Zoom in
Previous page
1/33
Next page
14
Customizing your Weather Station
To fully customize the weather station to your local settings and personal preferences, the
following settings are required. Please refer to the appropriate sections for detailed
instructions.
Required:
- Setting Pressure Parameters during Initial Start-Up (Pressure and Weather Forecast
Mode P.15)
- Setting up the Time, Date and Language (Clock and Alarm Mode: P.19)
- Setting up the Location Data (Sunrise/Sunset Mode: P.21 )
Optional:
- Setting up the Time Alarms (Clock and Alarm Mode: P.20)
- Setting up the Temperature Alerts (Temperature and Humidity Mode P.23)
- Setting up the Daily Rainfall Alerts (Rain Mode P.24)
- Setting up the Wind Alerts (Winds Mode: P.26)
LED Backlight Options
The backlight of the main console unit can be turned permanently on/off or automatically
toggled when environment lighting level is low. Use the light sensor switch at the back of
the unit to select lighting preferences.
For the automatic backlight function, the sensitivity of the light sensor can be adjusted to
high or low with the sensitivity switch also on the back of the console unit.
Note: Console unit must be powered with AC/DC adaptor for automatic control function
Linking the Weather Station to a Computer
The Pro X has an internal memory of 3300 complete datasets. Additionally it is equipped
with a USB 1.1 port which allows you to transfer the data to a PC. The SW for the PC you
may download free of charge from the internet. With this SW, and only with this, you may
alsodenetherecordingintervalforthesedatasets.
Thefreedownloadyouwillndonthefollowingpage:
www.irox.ch/software
- Install this Software on your PC
-AnyfurtherinstructionyouwillndinwiththeSW.
- Connect the USB port from your PRO-X2 by the provided USB cable with a free USB port
on your PC.
OnthedisplayofyourPRO-X2youwillndintheuppermiddlepartoftheLCDafterthe
successful connection a USB symbol.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox PRO-X2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox PRO-X2 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox PRO-X2

Irox PRO-X2 User Manual - German - 39 pages

Irox PRO-X2 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info