Manual Irox PRO-X2 (page 8 of 33) (English)

578609

Zoom out

Zoom in

1/33

Setting up the Anemometer (Solar cell wind sensor)

1. Assemble the wind cups and wind vane to the anemometer arm

2. Attach the assembled anemometer to the base.

3. Remove the 4 x screws at the battery door to open the battery compartment.

4. Plug in the re-chargeable battery according to the polarities shown (coded plug).

5. Insert two 2 x UM-3 or “AA” size 1.5V batteries into the battery holder in the base.

6.Mounttheanemometerontoaverticalsurface,usingthettingsprovided.

7.Toallowthemainconsoleunittondthedirectionwhichthewindvaneisoriented,the

following procedures are required:

i. Plug in the-chargeable battery and insert the two 1.5V (UM-3 or "AA" size)

batteries.

ii. Point the wind vane towards the north. Use a compass or map if necessary.

iii. Use a pin to press the “SET” key which is in the battery compartment of the wind

sensor.

Note: Above procedure must be repeated for changing battery.

The “SET” will toggle the direction between two mode:

1. Let the wind direction as manufacturer design. It will be as a default setting after

2. Set the current direction as NORTH.

Placement tips:

- Check that wind can travel freely around the anemometer and is not distorted by nearby

buildings, trees or other structures.

- For better results, place the anemometer at least 3m above local structures and

 obstacles.Thegroundcreatesafrictionaleffecttowindowandwillattenuatereadings.

- Aim for maximum exposure of the anemometer to the commonest wind directions in

your area.

-Theofcialmountinglocationforanemometersis10m(33ft)abovegroundlevelina 

clear unobstructed location.

Setting up the Main Console Unit

1. Open the latch at the back of the main console unit.

2. Insert 4 x UM-3 or “AA” size 1.5V batteries according to the polarities shown.

3. Reattach the latch.

4. You are highly recommended to connect the AC/DC adaptor. For the feathure of the

automatic backlight control function, the AC/DC adaptor must be used.

5. If placing the console unit on a table or horizontal surface, fold out the table stand and

adjust to the optimal viewing angle.

6. If mounting the console unit on a wall or vertical surface, fold the table stand back into

 theunitandusethettingprovided.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Irox PRO-X2 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox PRO-X2

Irox PRO-X2 User Manual - German - 39 pages

Irox PRO-X2 User Manual - French - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Irox PRO-X2 Manual

Product: