579054
25
Zoom out
Zoom in
Previous page
1/33
Next page
24
25
Setting up the Daily Rainfall Alert
1. In Rain Mode, press ALARM to display rainfall alert.
2. Press and hold ALARM until rainfall alert and “ALARM HI” starts ashing in the display.
3. Set Value for Rainfall Alert:
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARM to conrm your selection.
4. Upon completion the display will be returned to the rainfall alert display.
Disabling when Daily Rainfall Alert is Activated
To Disable Rainfall Alert:
Press ALARM to disable the alert.
Wind Mode
The wind direction is shown by an animated compass display. Its angle can be displayed
as compass points (i.e. NW) or in bearings from the north (i.e. 22.5º).
The upper left of the wind display can be set to indicate the temperature at the
anemometer or the temperature adjusted with a wind chill factor.
The lower left of the wind display indicates the average wind speed for the last 10 minutes,
as well as gust, wind speed alert and gust alert information. It can also show records of the
maximum values of wind speed and gust attained for the current day.
The wind speed and gust alert functions can be programmed to sound if the wind speed or
gust exceeds a pre-congured limit. The wind speed may be displayed in km/h, mph, m/s
or knots.
Note: The wind speed alert has a 5 mph hysteresis and the wind gust speed alert has a
7 mph hysteresis. The hysteresis is to prevent the alerts from sounding constantly due to
small uctuations near the alert value. This means that after the wind speed reaches the
alert value, it will have to fall below the alert value plus the hysteresis to deactivate the
alert.
Accessing Wind Mode
From the main console unit: Press UP or DOWN until the WIND icon on the display
starts ashing.
From the remote control: Press .
Conguring Wind Display
In Wind Mode, each press of SET rotates display between:
- Temperature with wind chill, wind direction in bearings
- Temperature with wind chill, wind direction in compass points
- Temperature at anemometer, wind direction in compass points
- Temperature at anemometer, wind direction in bearings
Setting Units for Wind Speed Display (km/h , mph, m/s or knots)
In Wind Mode, press and hold SET to convert wind speed units between km/h, mph, m/s or
knots.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox PRO-X USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox PRO-X USB in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox PRO-X USB

Irox PRO-X USB User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info