579054
6
Zoom out
Zoom in
Previous page
1/33
Next page
6
7
Anemometer
(Wind Sensor):
- Wind Cups
- Wind Vane
- Anemometer arm
- Anemometer base
4 screws for
securing unit to
vertical surface
2m (6ft) USB cable
Installing your weather station
Setting up the Remote Weather Sensors
Before starting up the main console unit, setup all the remote sensors rst.
When placing the sensors, make sure that they are within receiving range of the console
unit. Ideally they should be within the line of sight of the console unit. Transmission range
may be affected by trees, metal structures and electronic appliances. Test reception before
permanently mounting your weather station.
Also make sure that the sensors are easily accessible for cleaning and maintenance.
The remote sensors should be cleaned on a weekly basis, since dirt and debris will affect
sensor accuracy.
Setting up the UV Sensor
1. Unscrew the lid on top of the UV sensor.
2. Insert two 2 x UM-3 or “AA” size 1.5V batteries and screw the lid back onto the sensor
3. There are three different ttings available for mounting the UV sensor.
-Ground Stand:
Attach the circular ground stand onto the U-shaped sensor holder with the screws
provided.
-Stake:
Attach the sharp stake end onto the metal bar with the screws provided.
Attach the other end of the metal bar to the U-shaped sensor holder with the screws
provided.
-Wall mount:
Attach the wall mounting end onto the metal bar with the screws provided.
Attach the other end of the metal bar to the U-shaped sensor holder with the screws
provided.
4. Attach or place the sensor in a location with abundant sun exposure throughout the day.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox PRO-X USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox PRO-X USB in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox PRO-X USB

Irox PRO-X USB User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info