579018
35
Zoom out
Zoom in
Previous page
1/48
Next page
Functions and operation • 35
4.5.1 Settings (calibration, reference heights, altitude alarm)
With this button you can move to the set mode with the menus
SET ALTI - ALTI RECALL - ALTI ALARM
With these buttons you can scroll back and forth between the
three upper setting menus
With this button you move from one of the three menus to the
respective setting in the selected menu
1) SET ALTI
The current measured altitude is blinking and can be adjusted (calibrated) up/down
with the S/R and S/L buttons.
Confirm with M. On the next display, which can be selected with S/L and S/R, you
have following options: Curr rEF-1 rEF-2 rEF-3 ABORT.
This determines whether the set altitude should only be taken over as current alti-
tude (Curr) or at the same time stored as one of the reference altitudes (rEF 1-3).
(ABORT = abort setting).
As soon as the corresponding option is on the display, confirm with M and then
return to the menu SET ALTI.
! Important notice
If you conduct an altitude calibration, please make sure that at that moment the
TIMER and the STOPWATCH are not running. Due to the extra memory require-
ments the calibration may be negatively influenced.
35
Einstellungen (Kalibrierung, Referenz Höhen, Höhen-Alarm)
Wichtiger Hinweis:
Wenn Sie eine Höhen-Kalibrierung vornehmen, stellen Sie bitte sicher, dass in
diesem Zeitpunkt der TIMER und die STOPPUHR nicht läuft. Die Funktionen können
durch den extra Speicherbedarf die Kalibrierung negativ beeinflussen.
-- Damit gelangen Sie in den Einstellmodus mit dem Menüs
SET ALTI - ALTI RECALL - ALTI ALARM
-- Mit diesen Tasten können Sie zwischen den drei obigen
Einstellmenüs hin- und herscrollen
-- Damit gelangen Sie aus einem der 3 Menüs in die entsprechende
Einstellung in dem ausgewählten Menü.
1- SET ALTI ----> die aktuell gemessene Höhe blinkt und kann mit den Tasten
S/R und S/L nach oben/unten verstellt (Kalibriert) werden.
Bestätigen mit M. Auf der nächsten Anzeige, anwählbar mit S/L
und S/R, stehen folgende Möglichkeiten offen:
Curr <---> rEF-1 <---> rEF-2 <---> rEF-3 <---> ABORT Damit
wird bestimmt, ob die eingestellte Höhe nur als aktuelle Anzeige
übernommen wird (Curr) oder gleichzeitig noch als eine der
Referenzhöhen (rEF 1-3) gespeichert wird.
(ABORT = Einstellung abbrechen).
Sobald die entsprechen Option auf der Anzeige ist, mit M
bestätigen und dann zurück ins Menü SET ALTI.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox iClimber ER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox iClimber ER in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox iClimber ER

Irox iClimber ER User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info