578856
7
Zoom out
Zoom in
Previous page
1/10
Next page
5.2 THERMO/HYGROMETER WITH ALARM
With regard to operation, the HTG79 is in a 'sleep mode’ when no key is pressed for more than 2 minutes. This status is then
recognised by the fact that on the left-hand side of the display neither the
symbol nor the number in the channel display is
flashing. In such a case, the operation is activated by pressing one of the 3 keys. The corresponding symbol then flashes in the
field to be operated (
or ‘CH’ with corresponding number).
The HTG79 measures the temperature and rel. humidity directly and also receives the measurements of up to a maximum of 5
IROX radio sensors. Each sensor can be set to one of the channels 1-5 (resp. 1-3 for 3-channel appliances). In the two
information windows (radio sensors CH1....5 and
) the temperature currently measured is displayed in °C (or °F) and the
relative Humidty in %.
The following operations can be made in this function:
5.2.1 Reading of the temperature and the rel. humidity from each channel
Activate the CHANNEL key briefly to jump from channel to channel. The next channel is displayed with each press of the button
and activated for other operations.
The sequence of the activation is --> CH1 ---> CH2 --> CH3 --> CH4 --> CH5 --> --> CH1 --> etc
This is independent of whether a radio sensor is available in the system or not.
Note: The
measurement is always depicted in the lower window; the channels 1-5 one after the other in the middle window.
5.2.2 MIN/MAX memory
a) With the ‘MEMORY’ key you can read the Max/Min memory of the active channel by pressing it briefly (flashing symbol
or CH1 .... CH5). The corresponding MIN/MAX value is displayed together with the date and the time of the recording (‘time
stamp'). Each value will appear for approx. 4 seconds in the following sequence on the display:
- Maximum (=highest) temperature ‘MAX’
- Minimum (=lowest) temperature ‘MIN’
- Maximum (=highest) rel. humidity ‘MAX’
- Minimum (=lowest) rel. humidity ‘MIN’
- Back to display of the current measurement
The sequence can also be made manually by pressing the MEMORY key.
All values shown have been recorded since the last memory reset. If no data are available, lines appear.
b) Reset of the MIN/MAX memory
If you hold the CLEAR key pressed for approx. 3 seconds, the MIN/MAX memory values of the active channel (flashing
symbol
or CH1 .... CH5) are reset to the current value. The recordings of the other channels remain.
5.2.3 Measurement unit °C or °F
You can change the unit of temperature from °C to ° F (see Chapter 2.2). The setting on the display appliance or the sensor is
to be made independent of one another and only affects the display of the corresponding device.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox HTG79 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox HTG79 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox HTG79

Irox HTG79 User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info