578944
4
Zoom out
Zoom in
Previous page
1/6
Next page
90 91
8988
The atmospheric pressure can be displayed in mb/hPa or
inHg. To change the pressure unit, press and hold the
[UNIT] key at sea level pressure display and use [ ] or
[ ] (rear panel) key to select.
Press the [UNIT] key to confirm.
If you want to check the pressure history for a particular
hour during the past 36 hours, press the [HISTORY] button.
Each press on the button will go back by an hour.
The recorded atmospheric changes for the past 24 hour are
displayed in a bar chart above the atmospheric pressure window.
4. UV-MEASUREMENT
4a) Description
The UV-Index (UVI) is an international standard defining
the intensity of the UV radiation of the sun. The higher the
UVI, the stronger is the UV radiation of the sun and
therefore potentially harmful to humans.
The UVI makes you aware of this and helps you to choose
the correct protection.
5c) MAXIMUM AND MINIMUM
TEMPERATURES AND HUMIDITY
The maximum and minimum recorded indoor temperature,
humidity and outdoor temperatures will be automatically
stored in memory. To display them, Press [ MEM ] once
to display the maximum readings and again the minimum
readings. The respective indicators,
[ MAX ] or [ MIN ] will be displayed.
To clear the memory, hold down [ MEM ] for two seconds.
The maximum and minimum readings will be erased.
If you press [ MEM ] now, the maximum and minimum
readings will have the same values as the current ones until
different readings are recorded.
5d) TEMPERATURE ALARM
Weather Station is equipped with a temperature alarm
whereby a user-defined temperature can be selected.
When the selected temperature is reached an acoustic alarm
will be initiated. Temperature alarm is programmed as
follows:
1. Press the [TEMP ALARM] button.
2. Hold the [TEMP ALARM] button for 2 seconds.
3. Select the desired temperature for the alarm by using the
[ ] or [ ] buttons.
With one further pressing of the TEMP ALARM button
the data entered is confirmed.
The current and historical barometric pressure is shown
on the atmospheric pressure window. For user staying at
a higher altitude such as in the mountain area, see-level
barometric pressure applies. Use [PRESSURE /
ALTITUDE key to toggle the display to sea level pressure
display. Press and hold the Pressure/Altitude key to enter
the sea level pressure adjusting mode.
Use the [ ] or [ ] (rear panel) key to enter sea level
pressure and use [PRESSURE/ALTITUDE] to confirm.
5. THERMOMETER / HUMIDITY
5a) HOW TO CHECK REMOTE AND
INDOOR TEMPERATURES
The wave display on the outdoors temperature indicates the
reception of the remote unit is in good order. If no readings
are received from the remote unit for more than two minutes,
blanks “ ” will be displayed until further readings are
successfully searched. Check the remote unit is sound and
secure. You can wait for a little while or Hold [ ] for 2
seconds to enforce an immediate search. If the temperature or
humidity goes above or below than the measuring range of
the main unit or the remote unit (stated in specification), the
display will show “ ” & “HHH” or “LLL” respectively.
The unit can be set to automatically scan and display
readings from the remote sensors, the display will show
the readings from one channel for about 4-seconds and
then proceed to the next channel display.
-To activate the remote-sensor scanning mode:
Press and the hold the button [CHANNEL] for 2 seconds.
-To deactivate the remote-sensor scanning mode:
Press and the hold the button [CHANNEL] for 2 seconds.
5b) HOW TO READ THE KINETIC
WAVE DISPLAY
The kinetic wave display shows the signal receiving status
of the main unit. There are three possible forms:
The unit is in searching mode.
Temperature readings are
securely registered.
No signals.
˚C
3b) BAROMETRIC PRESSURE TREND
The atmospheric pressure indicator, in the weather forecast
window, uses arrows to indicate if the atmospheric
pressure is increasing, remaining stable, or decreasing.
TREND
TREND
TREND
Arrow
indicator
Pressure
Trend
Steady FallingRising
UV-Index Level Intensity Protection
0 -2.9
weak No protection necessary
3 - 5.9
medium
Protection necessary:
Hat, t-shirt, sun glasses, sun cream
6 - 7.9
high
Protection necessary:
Hat, t-shirt, sun glasses, sun cream
8 - 10.9
very high
Additional protection necessary:
Avoid to stay in unprotected areas
11+
extreme
Additional protection necessary:
Avoid to stay in unprotected areas
Symbol
4b) UV table and display indicates
3c) HOW TO CHECK THE
BAROMETRIC PRESSURE
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox HBVR761 UV-X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox HBVR761 UV-X in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox HBVR761 UV-X

Irox HBVR761 UV-X User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info