578600
53
Zoom out
Zoom in
Previous page
1/60
Next page
ENG
53
WIRELESS REMOTE SENSOR REGISTRATION
PROCEDURE
1. Insert x4 AA batteries rst to the main unit, the temperature display shows
- - . – While the wave icon will keep blinking for 2 minutes indicate unit is
in sensor searching mode.
2. In a second step, insert the x2 AAA batteries for the sensor unit. The LED
on the front panel will start ashing at a rate of one time per around 2
seconds indicates channel-1 is in use.
3. While the LED is ashing, press once the [CH] key will change the sensor
channel setting to 2. Keep toggle on [CH] key can change channel setting
up to 3. The LED is blinking at a frequency to indicate the channel setting.
i.e. continuous blinks 2 times indicate channel-2 is selected.
Note:
If user does not press any key for 10 seconds, it will exit the channel setting
mode and transmit the RF signal. The main unit will register the temperature
reading.
(If the transmitter has the LCD display, the C/F key will toggle the temperature
unit on the LCD.)
REMOTE CHANNEL AUTO-SCROLLING
This device is equipped with an auto-scroll function. While the auto-scroll
function is set, the unit will automatically cycle to display the temperature of
each remote sensor for 6 seconds.
1. To retrieve manually the specic sensor temperature reading, press
CHANNEL key until desired channel number is displayed.
2. To enable auto-scroll function, use CHANNEL button to select channel 1,
2, ... until auto scroll is enabled.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox EBR707C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox EBR707C in the language / languages: English, French, Italian as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info