578594

Irox EBR505 Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
(ENG)
-5-
WIRELESS REMOTE SENSOR REGISTRATION PROCEDURE
1. Insert 3 pieces of AA batteries first to the main unit. The temperature display shows - - - - while the wave icon will keep blinking
for 2 minutes indicate the main unit is in sensor searching mode.
2. In a second step, insert the 2 pieces of AA batteries into the sensor unit. The red LED on the front will start flashing at a rate of
one time per 2 seconds indicates channel-1 is in use.
3. While the red LED is flashing, press once the ▲/CH button (located in the battery compartment) will change the sensor channel
setting to 2. Keep toggle on ▲/CH button can change channel setting up to 3. The LCD is blinking at a frequency to indicate the
channel setting, i.e. continuous blinks 2 times indicate channel-2 is selected.
Note: If user does not press any key for 10 seconds, it will exit the channel setting mode and transmit the RF signal.
The main unit will register the temperature reading.
For later sensor search and registration:
- Start the sending mode on the main unit by pressing the ▲/CH button for 2 seconds.
- On the sensor unit do as described in step 2 and 3 above.
REMOTE CHANNEL AUTO-SCROLLING
This device is equipped with an auto-scroll function. While the auto-scroll function is set, the unit will automatically cycle to display
the temperature and humidity of each remote sensor for 6 seconds.
1. To retrieve manually the specific sensor temperature and humidity reading, press ▲/CH button until desired channel number is
displayed.
2. To enable auto-scroll function, use ▲/CH button to toggle channel 1, 2 or 3 until auto scroll icon appears on the left hand side of
the second line display.
DCF 77 RADIO CONTROLLED CLOCK
The time signal DCF 77 is transmitted by the atomic clock in Mainflingen near Frankfurt/Main. The long-wave transmitter has a range
of up to 1500km.
If the time icon is displayed without waves you have reception problems. Please observe following points:
- There are fewer disturbances in the atmosphere during the night which increases the likeliness of reception. One reception per day
is completely sufficient to ensure the preciseness of the clock by +/- 1 second
- Make sure that the device is at least 2 meters (8 feet) away from possible sources of disturbance such as TV, computer, monitor,
microwave etc.
- In rooms with concrete or metal walls (e.g. cellar rooms, modern office buildings etc.) the receipt of the signal may be more difficult
due to the shielding. In such cases find a better location for the device near a window. Sometimes it also helps to simply turn the
device by 90°, thereby improving the alignment of the receiving antenna.
Once the time signal is received, the wave icon will stay on the LCD, and time and calendar will automatically be updated.
Note: During the 10-minute time signal reception, all manual settings will be suspended. If setting is desired, press once
button key to deactivate the reception. You can also press and hold the same key for 3 seconds to manually
activate the reception in normal mode.
Attention: The radio controlled time signal reception automatically activates itself again within 24 hours.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox EBR505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox EBR505 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox EBR505

Irox EBR505 User Manual - German - 8 pages

Irox EBR505 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info