632875
19
Zoom out
Zoom in
Previous page
1/25
Next page
www.irobot.com 19
Troubleshooting
Problem Possible Cause What to Do
Verro will
not start a
cleaning cycle
The Power Supply is not
plugged in
The floating power cord
is not plugged into the
Power Supply
Plug the Power Supply into a GFCI outlet. Keep the Power
Supply at least 12 feet from the pool.
Plug the floating power cord into the Power Supply.
When the plug is fully seated, turn the locking collar
clockwise to lock it. (p. 9)
Verro is not
cleaning
properly
The filter bag needs to be
cleaned
The pump impeller is
fouled
Clean the filter bag. (p. 12)
Clean the impeller. (p. 18)
Verro does
not climb the
walls of the
pool
The filter bag needs to be
cleaned
The brushes,drive
belts or drive tracks
need replacing
The pump impeller is
fouled
Clean the filter bag. (p. 12)
Replace brushes, drive belts or drive tracks. (p. 16)
Clean the impeller. (p. 18)
The floating
power cord
is tangled or
kinked
The floating power cord
has become twisted
Use Detangler to untwist the cord. (p. 17)
Remember to reverse the direction of the handle
before each cleaning cycle.
Many problems with Verro are caused by a dirty or clogged filter bag. Verro
depends on water flowing freely through the filter bag to operate at peak
efficiency. If the filter bag gets clogged, Verro will not move as well and will
not be able to clean as effectively. The fine filter bag can trap particles as
small as two microns across and can be clogged by particles too small to
see. If rinsing the filter bag by hand with a hose does not solve the problem,
try machine washing it in cold water. Do not use any detergent, fabric
softeners, bleach, or any other additives. Do not machine dry the filter bag.
If you find the filter bag gets clogged too quickly, consider using the mesh bag
instead (mesh filter bags are available separately from www.irobot.com).
Always turn off Verro’s Power Supply and unplug it before troubleshooting
any problem.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Verro 600 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Verro 600 Series in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info