632874
21
Zoom out
Zoom in
Previous page
1/31
Next page
www.irobot.com 21
Troubleshooting
Problem likely Cause What to Do
Verro moves
slowly
The filter bag needs to
be cleaned
Flaps in the vacuum
intakes at bottom of
robot are blocked
Wheels or axles are
not turning freely
The pump impeller is
fouled by dirt or debris
Clean the filter bag. (p. 13)
Check the flaps in the vacuum intakes. (p. 20)
Check wheels and axles for dirt and debris.
Clean the pump impeller. (p. 17)
Verro does
not cover
entire pool
The filter bag needs to
be cleaned
Time control dial is not
set properly
Floating power cord is
not positioned to allow
Verro to reach all of pool
Flaps in the vacuum
intakes at bottom of
robot are blocked
Wheels or axles are
not turning freely
The pump impeller is
fouled by dirt and debris
Clean the filter bag. (p. 13)
Set the time control dial. (p. 12)
Move Power Supply so that it is near
the middle of a long side of the pool.
Check the flaps in the vacuum intakes. (p. 20)
Check wheels and axles for dirt
and debis.
Clean the pump impeller. (p. 17)
Most problems with Verro are caused by a dirty or clogged filter bag. Verro
depends on water flowing freely through the filter bag to operate at peak
efficiency. If the filter bag gets clogged, Verro will not be able to clean as
effectively and may not move as well. The fine filter bag can trap particles as
small as two microns across and can be clogged by particles too small to
see. If rinsing the filter bag by hand with a hose doesn’t solve the problem, try
machine-washing it in cold water. Don’t use detergent, fabric softener, bleach,
or any other additive. Do not machine dry the filter bag.
If you find the fine filter bag gets clogged too quickly, consider using the mesh
bag instead.
Always turn off Verro’s Power Supply and unplug it before troubleshooting
any problem.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Verro 300 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Verro 300 Series in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info