632876
30
Zoom out
Zoom in
Previous page
1/36
Next page
28 Roomba
®
900 Series Owner’s Guide
EN
Troubleshooting
Roomba will tell you something is wrong with a two-tone distress
sound followed by a spoken message. The troubleshooting
indicator (
) will also blink. Refer to the chart on the right to
resolve Roomba’s problem. This troubleshooting information,
along with more detailed support and videos, are available
through the iRobot HOME App as well as online. If the problem is
not resolved, visit www.irobot.com/support.
Repeating Error Messages
To repeat Roomba’s error message, press CLEAN. If Roomba is on,
you can also press the bumper to repeat the message.
Rebooting Instructions
For some errors, rebooting Roomba may resolve the problem.
To reboot Roomba, press and hold CLEAN for 10 seconds until
all indicators illuminate, then release. When you release the
CLEAN button, you will hear an audible tone signifying a
successful reboot.
Note: If you use Roomba’s scheduling feature, open the iRobot HOME App
after rebooting to confirm that Roomba’s schedule remains intact.
Roomba Blinks
and Says …
Likely Cause What to Do
Error 1.
Left/Right. Place
Roomba on a flat
surface then press
CLEAN to restart.
Roomba is stuck
with its left or right
wheel hanging
down.
Ensure Roomba’s wheels are
firmly on the floor. If Roomba is
on an obstacle or hanging over
a drop, start in a new location.
Otherwise, clean its side wheels
of hair and debris. Push the
wheels in and out, and check
that they both turn freely.
Error 2.
Clear Roomba’s
debris extractors,
then press CLEAN
to restart.
Roomba’s main
extractors can’t
turn.
Remove and clean Roomba’s
extractors and caps.
Error 5.
Left/Right. Clear
Roomba’s wheel,
then press CLEAN
to restart.
Roomba’s left or
right wheel is stuck.
If Roomba is stuck, free it and
start in a new location. Clean
Roomba’s side wheels of hair
and debris. Push the wheels in
and out, and check that they
both turn freely.
Error 6.
Move Roomba to a
new location then
press CLEAN to
restart.
Roomba’s cli
sensors are dirty, it
is hanging over a
drop, or it is stuck
on a dark surface.
If Roomba is hanging over a
drop, or on a dark surface, start
in a new location. Otherwise,
wipe its cli sensors with a
dry cloth.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Roomba 980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Roomba 980 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irobot Roomba 980

Irobot Roomba 980 User Manual - German - 36 pages

Irobot Roomba 980 User Manual - Dutch - 36 pages

Irobot Roomba 980 User Manual - French - 36 pages

Irobot Roomba 980 User Manual - Italian - 13 pages

Irobot Roomba 980 User Manual - Spanish - 36 pages

Irobot Roomba 980 Quick start guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info