667537
6
Zoom out
Zoom in
Previous page
1/15
Next page
Roomba
®
800 Series Owner’s Guide 3
EN
Using your Roomba
To send Roomba back to its Home Base during a cleaning cycle, press
DOCK on Roomba. This will end the cleaning cycle.
To use SPOT Cleaning, place Roomba on top of the localised debris
and press SPOT on the robot. Roomba will thoroughly clean the area by
spiraling outward about 3 feet (1metre) in diameter and then spiraling
inward to where it started.
When Roomba returns to the Home Base after completing a cleaning
cycle, it will play a series of tones to indicate successful completion of the
cleaning cycle.
Note: After each use, empty the bin and clean the filter.
Always store Roomba on the Home Base so it’s charged and ready to
clean when you need it. If storing away from the Home Base, remove the
battery first and then store Roomba and the battery in a cool, dry place.
Battery and Charging
Charge Roomba using the Home Base. The indicator lights will turn o
after 60 seconds to conserve energy while Roomba is charging. Check the
status of the battery by pressing the CLEAN button to illuminate the Battery
Indicator. The indicator will appear amber while the battery is charging and
solid green when fully charged.
Setting the Clock
You must set the clock before scheduling Roomba to clean. To set the time:
Positioning the Home Base
®
Place the Home Base in an open, uncluttered area,
leaving the following distances around the Home Base:
At least 1.5 feet (0.5 metres) on each side of the
Home Base
At least 4 feet (1.2 metres) in front of the Home
Base and at least 4 feet (1.2 metres) away from stairs
At least 8 feet (2.4 metres) from Virtual Wall Barriers
Always keep the Home Base plugged in.
Use Instructions
Turn your robot over and remove the bin insert and battery pull
tabs. Then place Roomba on the Home Base to charge.
Fully charge the battery before the first cleaning by allowing
Roomba to charge on the Home Base for 3 hours.
Manually wake Roomba up by pressing CLEAN once.
To start a cleaning cycle, press CLEAN again.
Note: Remove excess clutter from floors before cleaning
(e.g. clothing, toys, etc.). Use Roomba frequently to maintain
well-conditioned floors.
To pause Roomba during a cleaning cycle, press CLEAN. To
resume the cleaning cycle, press CLEAN again.
To end the cleaning cycle and put Roomba in standby mode,
press and hold CLEAN until Roomba’s indicators turn o.
If Roomba encounters an area of high debris concentration, it
will move in a forward/backward motion to clean the area more
thoroughly. When Roomba does this, you will see the Dirt Detect™
Indicator ( ) illuminate.
1
2
3
Press
CLOCK
.
Use the DAY, HOUR, and MINUTE buttons to set the correct time.
Press OK. Roomba will beep to indicate the time and date has been set.
6


Need help? Post your question in this forum.

Forumrules
1

Forum

irobot-roomba-860

Reset search

  • I want to get rid of auto start , and run by manual? Submitted on 2-12-2022 at 21:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Roomba 860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Roomba 860 in the language / languages: English as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irobot Roomba 860

Irobot Roomba 860 User Manual - German - 15 pages

Irobot Roomba 860 User Manual - Dutch - 15 pages

Irobot Roomba 860 User Manual - French - 15 pages

Irobot Roomba 860 User Manual - Italian - 15 pages

Irobot Roomba 860 User Manual - Spanish - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info