478689
27
Zoom out
Zoom in
Previous page
1/36
Next page
For more detailed information, visit: www.irobot.com 27
TIP: To reset Roomba’s software, simultaneously hold down the two
buttons above and below CLEAN for 10 seconds. This will clear
all scheduled cleaning times, reset the clock and may resolve
some software issues.
Roomba
blinks...
Roomba
displays...
(models 550+)
Roomba
says….
Likely cause What to do
1 blink -
Charging
Error 1.
Roomba’s battery is not
connected.
Confirm that Roomba’s
battery pull-tab is removed.
Remove the bottom cover of
Roomba to remove and re-
install Roomba’s battery.
2 blinks
Err2
Charging
Error 2.
Roomba has a
charging error.
Let Roomba cool down for
at least one hour and try
charging again.
3 blinks Err3
Charging
Error 3.
Roomba has a
charging error.
Reset Roomba’s software
(refer to tip below) and try
charging again.
5 blinks Err5
Charging
Error 5.
Roomba has a
charging error.
Reset Roomba’s software
(refer to tip below) and try
charging again.
6 blinks
Err6
Charging
Error 6.
Roomba’s battery is too
warm.
Let Roomba cool down for
at least one hour and try
charging again.
7 blinks
Err7
Charging
Error 7.
Roomba’s battery is
not cooling.
Let Roomba cool down for
at least one hour and try
charging again.
Charging Errors (while charging)
Runtime Errors (continued)
Roomba
beeps...
Roomba says…. Likely cause What to do
11 beeps
Roomba’s bumper is not
registering obstacles.
Roomba may be stuck in
one place.
Tap Roomba’s bumper to confirm
it is working properly. If this error
occurs when Roomba is circling,
clean wheels of hair and debris.
If Roomba is in an extremely
large room, use a Virtual Wall to
create a smaller cleaning area.
12 beeps
A cliff sensor is dirty or
broken.
Inspect and clean Roomba’s cliff
sensors.
Please charge
Roomba.
Roomba’s battery is
discharged.
Plug Roomba into the power
supply or place on the Home
base to charge.
Please inspect and
clean Roomba’s cliff
sensors.
Roomba’s cliff sensors
are dirty.
Wipe cliff sensors with a dry
cloth. Ensure Roomba is starting
with all wheels firmly on the floor.
Please inspect and
clean Roomba’s
wheels.
Roomba’s side wheel is
stuck.
Clean wheels of hair and debris.
Push them in and out and
confirm that they turn freely.
Ensure Roomba is starting with
all wheels firmly on the floor.
Please remove and
clean Roomba’s
brushes.
Roomba’s main
brushes cannot turn.
Remove and clean Roomba’s
brushes.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Roomba 536 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Roomba 536 in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irobot Roomba 536

Irobot Roomba 536 User Manual - German - 36 pages

Irobot Roomba 536 User Manual - Dutch - 36 pages

Irobot Roomba 536 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info