632872
2
Zoom out
Zoom in
Previous page
1/16
Next page
2 iRobot Mirra 500 Series Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL THE INSTRUCTIONS
CAUTION: Do not plug the power supply into a grounded outlet or do not switch
the pool cleaner “ON” if it is not fully immersed in water.
Operating the cleaner out of waterwill cause severe damage immediately and will
result in loss of warranty.
Allow the cleaner to remain in the pool for 15 to 20 minutes following the end of
its cleaning cycle. This will allow the motors to cool adequately. Do not leave the
cleaner in the pool all the time. Always remember to turn the power supply “OFF”
and unplug it from the power outlet before removing the cleaner from the pool.
WARNING: The cleaner must not be used when people are in the water.
For use with swimming pool only.
Safety Note
The unit must be supplied through a residual current device (RCD or GFCI) having
a rated residual operating current not exceeding 30 mA
The connection to the branch circuit should be consistent with the local and
national wiring rules (electrical code).
• Mishandling of the unit can result in leakage of lubricants.
If the supply cord is damaged, it must be replaced by the manufacturer’s
service agent or a qualified and trained person in order to avoid hazards.
Components
While the appearance of your cleaner and some of its components may differ from
those shown here, the function of the cleaner, operating procedures and maintenance
practices are the same.
Registration and Warranty
Please visit www.irobot.com/register to register your product and activate
your warranty.
WARNING: A Ground Fault Current Interrupter (GFCI-USA) or a Residual Current Device
(RCD-EUROPE) must be installed to protect your electric outlet and preventany possible
electric shock.
SAVE THESE INSTRUCTIONS
Please read this manual completely before operating your pool cleaner.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Your new automatic pool cleaner contains:
The robotic pool cleaner with its floating cable.
The Power Supply (transformer).
1) Handle
2) Cable
3) Outlet Top
4) Filter Access
5) Filter Lock Lever
6) Wheels
7) Unit Body
8) Intake Valves
9) Rolling Brush
9
1
6
5
4
8
7
3
2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Mirra 500 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Mirra 500 Series in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irobot Mirra 500 Series

Irobot Mirra 500 Series User Manual - German - 16 pages

Irobot Mirra 500 Series User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info