Manual IRIS IRISPen Translator 6 (page 11 of 66) (English)

655235

Zoom out

Zoom in

1/66

CHAPTER 1- INTRODUCING THE IRISPEN

To scan the data with the IRISPen, you must simply slide the pen

scanner over the line of text or area.

Operate as follows:

• Hold the IRISPen like a pencil and place it a few millimeters

before the first characters or data to be recognized. The pen

scanner must be positioned so that the text line to be read is right

in the center of the scanning head, directly under the guide

line.

! Yellow is the IRISPen's invisible color. It cannot be picked up

by the scanner. Do not scan any data printed in yellow.

Also see: Learn how to... Scan from right to left,

Warning:

The pen scanning band is 0.41" (10.5mm.) high and covers in

many cases several lines of text. As the pen only picks the

"central" line within the scanning band, position the line to be

scanned properly.

• Press the pen onto the paper and roll it over the text line at a

steady rate. Once pressed, the start switch is activated and the

data is illuminated by a green light.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of IRIS IRISPen Translator 6 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

IRIS IRISPen Translator 6 Manual

Product: