THE BULLET THE WHITE LINE
5
Turning the Speaker On/Off
Connect the plug at the end of power adapter cable
to the DC IN socket on the back of the Speaker.
Then insert the power adapter into the mains socket.
Press POWER button to turn the Speaker on or off.
Switching Mode
Press MODE button to switch between Bluetooth
and Aux in modes.
Volume Control
Adjust the Speaker volume by scrolling the VOLUME
+/- dial.
Indicator light
The Speaker is in Bluetooth
mode and it is in the
process of connecting via
Bluetooth to another device.
Bluetooth Mode
Press POWER button to turn the Speaker on.
The MODE indicator will start blinking blue light as
the speaker searches for devices to pair with via
Bluetooth.
Pairing the Speaker with Bluetooth
device
1. Switch the Speaker to Bluetooth mode.
2. Activate your Bluetooth device and select the
search mode.
3. ‘Bullet’ will appear on your Bluetooth device.
4. Select ‘Bullet’ and enter “0000” for the password
if necessary.
5. The Speaker will indicate that the pairing is
complete when the blue light of MODE
indicator stops flashing and remains lit.
6. Play your audio as you would normally use your
device.
7. To pair the speaker with another Bluetooth
device you will first need to disconnect the
already connected device by selecting “Forget
device” from your device’s Bluetooth settings.
Once this is done you can set up a new
connection by going through steps 1 to 5 again
Resetting Bluetooth memory
Press and hold RESET button for 5 seconds to clear
Bluetooth pairing information.