738844

IQAir HealthPro 250 Manual

18
Zoom out
Zoom in
Previous page
1/28
Next page
4.4.8 Filter Life Reset
1. To reach the Filter Life Reset function from the main display window, press
the Menu key seven times.
2. Press and hold the Enter key until the ashing cursor appears.
3. Press the pkey to select the lter that has been replaced.
4. Press the Enter key to conrm that the selected lter has been replaced. To
safeguard against inadvertently resetting the life of the wrong lter, the
selection needs to be reconrmed. The Filter Life LED for the appropriate
lter is now ashing red. Note: If the wrong lter has been selected, or if you
wish to exit the enter mode, press the Menu key. This leaves the Filter Life
Reset unaffec ted.
5. To conrm the lter change and exit the Filter Life Reset display window,
press the Enter key.
6. Upon successful reset of the lter life, the new remaining lter life (taking
the currently selected fan speed and programmed lter load indices into
account) will be displayed.
4.4.10 Language Setting
The Language Menu Display allows to change the system’s display language.
1. To reach the Language Menu Display from the main display window, press
the Menu key ten times. The current display language is displayed.
2. To change the display language, press and hold the Enter key until the cursor
starts to ash.
3. Use the pkey to scroll through the display language options.
4. Press the Enter key to save the display language and to exit the enter mode.
18
Chapter 4 – Using the Control Panel
4.4.9 Changing the Airow Units
N.B. The air delivery (airow units) displayed in this manual are examples only
and will vary according to model.
1. You can change the air volume units from cubic feet per minute (cfm) to cubic
meters per hour (m3/h), and vice versa, by pressing the Menu key eight times
and then the Enter key for three seconds.
2. When the rst character of the air volume units starts to ash, press the pkey
once to change the units.
3. Press the Enter key to conrm the air volume unit change. Until modied
again, the airow rate will now be displayed in the newly selected units.
The Filter Life Reset function allows the lter life counter to be reset after a new lter has been inserted. As a result,
the appropriate lter life LED on the control panel will be reset to green and the hour count in the Filter Life Reset
display will be reset to the full life span of the new lter. Note: Resetting the
lter life counter will also cancel the “Replace Filter” warning from the main
display window.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IQAir HealthPro 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IQAir HealthPro 250 in the language / languages: English as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info