Chapter 6 – Replacing Filters
24
6. With the palm of the hand, press down on
the lter and loosen the frame.
5. Turn the frame upside down.4. Remove the lter clamps that secure the
lter in the frame, by pulling these out of
the sliding grooves.
9. Turn the frame around and insert the
new lter. Ensure that the arrows on the
lter label point upward.
11. Put the frame back into the housing. For
details on how to close the hou sing,
please refer to the section 6.3.
8. Dispose of the used lter by placing it
into the plastic bag in which the new
lter is supplied.*
7. Lift the frame from the lter.
10. Make sure that the lter is inserted all the
way into the frame. Insert the clamps into
the sliding grooves inside the frame and
push them down.
* If harmful substances are ltered,
disposal of the used lters may be subject
to local regulations or laws.
Important: After a filter has been replaced,
the filter life monitor must be reset (see
section 4.4.8).
