10
Chapter 3 – The IQAir® System’s Components
1. Room air is drawn into the system via two arched open -
ings at the base.
2. The air is drawn in through the HEPA pre-lter that al -
rea dy removes most pollu tion particles.
3. At the heart of the system, sand wiched between the
l ters, is a powerful centrifugal fan which generates the
airow.
4. The air is pushed through four cartridges that contain
up to 7,8 kg of gas phase control media, which retains
specic chemical pollutants.
5. Particulate post-lter sleeves hold back abrasion
particles from the gas phase lter media.
6. Low turbulence, low velocity air is returned to the room
via the EvenFlow™ diffuser.
3.2 Description of Removable Components
The IQAir system features a modular housing design which enables the easy replacement of all lters in a matter of
seconds. The illustration below shows all the removable components. For more details on how to re pla ce lters,
please refer to Chapter 6 – Replacing Filters.
3.3 How the IQAir® System Works
Gas phase filter
cartridges
Pre-filter
Frame 2
Frame 1
Frame 3
filter clamps
EvenFlow™ Diffuser
Post filter sleeves