738852

IQAir Dental Series Manual

18
Zoom out
Zoom in
Previous page
1/26
Next page
16
Chapter 4 – Using the Control Panel
4.4.8 Filter Life Reset
The Filter Life Reset function allows the Filter Life Monitor to be reset after a new
filter has been inserted. As a result, the appropriate filter life LED on the control
panel will be reset to green and the hour count in the Filter Life Reset display will
be reset to the full life span of the new filter.
Note: Resetting the Filter Life Monitor will also cancel the “Replace Filter” warning
from the main display window.
1. To reach the Filter Life Reset function from the main display window, press the
Menu key seven times.
2. Press and hold the Enter key until the flashing cursor appears. The flashing
filter refers to the filter and its position within the system.
3. Press the ▲ key to select filter that has been replaced.
4. Press the Enter key to confirm that the selected filter has been replaced.
5. To safeguard against inadvertently resetting the life of the wrong filter, the
selection needs to be reconfirmed. To reconfirm the filter change and exit the
Filter Life Reset display window, press the Enter key.
Note: If the wrong filter has been selected, or if you wish to exit the enter
mode, press the Menu key. This leaves the Filter Life Reset unaffected.
6. Upon successful reset of the filter life, the new remaining filter life (taking the
currently selected fan speed into account) will be displayed.
4.4.7 Time & Day Setting
In order to use the timer function, the current day and time must be set. Once the
current day and time are set, they will only need to be reset if the unit is
disconnected from the power supply for more than an hour.
1. To access the Time & Day function from the main display window, press the
Menu key six times.
2. Press and hold the Enter key until the cursor starts to flash.
3. Select the hour by pressing the ▲ key.
4. Press the Enter key to save the hour setting and to proceed to the minute
setting.
5. Select the minutes by pressing the ▲ key.
6. Press the Enter key to save the minute setting and to proceed to the day
setting.
7. Select the day of the week by pressing the ▲ key.
8. Press the Enter key to save the day setting and to exit the enter mode.
9. Press the Power key to return to the main display.
Note: The display will automatically return to the main window if no key is
pressed for 15 seconds.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IQAir Dental Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IQAir Dental Series in the language / languages: English as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of IQAir Dental Series

IQAir Dental Series Additional guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info