738857

IQAir Cleanroom H13 Manual

14
Zoom out
Zoom in
Previous page
1/28
Next page
14
Chapter 4 – Using the Control Panel
4.4.5 Timer ON/OFF Fan Speed Selection Menu
The Timer ON/OFF Fan Speed Selection Menus allow the setting of two different
fan speeds for two different time periods (referred to as Timer ON period and
Timer OFF period). For the Timer ON period you can select fan speeds 1 to 6. For
the Timer OFF period, you can select fan speeds 0 (OFF) to 6.
1. To reach the Timer ON Fan Speed Selection Menu from the main display
window, press the Menu key four times.
2. Press and hold the Enter key until the black cursor appears.
3. Press the p key to select the desired speed for the Timer ON period.
4. Press the Enter key to conrm the chosen speed and to exit the enter mode.
5. To set the Timer OFF period fan speed, press the Menu key one more time.
Press and hold the Enter key until the black cursor appears and adjust the
Timer OFF fan speed as above. The nal Enter command saves the selection
and exits the enter mode.
4.4.4 Day-of-the-Week Timer
The Day-of-the-Week Timer allows the deactivation of the Timer ON period on
certain days of the week. In its default setting the Timer ON period is enabled on
all seven days of the week. This is indicated by stars below the abbreviations of
the days. On days without a star the air cleaner will be running at the speed
which is set in the Timer OFF Speed Selection Menu (see 4.4.5).
Note: At least one day of the week must be activated with a star to enable the
Auto Timer. If the timer is disabled on all days of the week, the timer status eld
in the Auto Timer Menu will switch to OFF and the timer will be disabled.
1. To reach the Day-of-the-Week Timer Menu from the main display window,
press the Menu key three times.
2. Press and hold the Enter key until the cursor appears.
3. Press the p key to activate (star) or deactivate (no star) the Timer ON period
on a particular day. Press the Enter key to proceed to the next day.
4. Repeat the same procedure until the timer has been activated/deac ti va ted
on the desired days. The nal Enter command exits the enter mode.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IQAir Cleanroom H13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IQAir Cleanroom H13 in the language / languages: English as an attachment in your email.

The manual is 5,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info