462569
8
Zoom out
Zoom in
Previous page
1/32
Next page
HF234
HF150-185
The machine must be placed on a fl at, solid surface (metal base, concrete
or solid ground). It is recommended that the machine be anchored on the
provided places (A) in the base, especially in case of a plinth
(see Dimensions 2).
The machine must be placed entirely level. For easy maintenance it is re-
commended to keep a minimal distance of 600 mm between the wall and
the back of the machine.
If several machines are placed next to each another, there should be a mi-
nimal distance of 30 mm between each machine.
To prevent damage during transportation, the machine has been equipped
with four red transport brackets to eliminate every possible movement of
the tub.
After the machine has been placed level, take off the service- and the back
panel to remove these transport brackets.
Important
The machine must never be activated before removing
these transport brackets.
Removal of the transport safety
The machine is delivered with hoses with 3/4" connections. These hoses
t the water inlet valves of the machine and the main water inlet taps. To
ensure the optimal functioning of the water inlet valves, the water pres-
sure on the inlet should be between 0,5 and 10 kg/cm² (7 and 145 psi). If
the pressure is too low, the cycle time will increase considerably.
In case of boiler fed machines, a minimum of hot water of 90°C should be
available: For the HF150: 94 l. HF185: 115 l. HF234: 150 l.
Water connection
Installation and connection
3
Ground
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IPSO HF 185 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IPSO HF 185 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info