Manual Ion Max LP (page 3 of 28) (English, German, Dutch, French, Italian, Spanish)

617068

Zoom out

Zoom in

1/28

Using Max LP With Your Computer

Playback

There are 3 ways to listen to your vinyl records with Max LP:

1. You can simply listen to your music using Max LP’s internal speakers.

2. If you prefer to use your own stereo speakers, you can connect Max LP's RCA outputs to a stereo system or to powered

speakers. Do not connect them to phono-level inputs; Max LP's RCA outputs are line-level and could damage a device with

phono-level inputs. (Any other standard input type, such as CD, Aux In, or Tape is acceptable).

3. You can listen through your computer speakers or with headphones connected to your computer, once your computer

soundcard’s input device has been set to USB PnP Audio Device or USB Audio Device, depending on your Windows

operating system (USB PnP Audio Device on Mac OS X) and that you are record-monitoring the audio using EZ Vinyl/Tape

Converter or similar software (Max LP cannot be used as a playback device for your computer's audio.). See the section

Setting Your Computer’s Soundcard as the Default Playback Device for details on how to configure sound playback.

Recording

To record music to your computer, you can use ION EZ Vinyl/Tape Converter.

EZ Vinyl/Tape Converter makes it easy to turn your music into digital files. After

you finish converting your vinyl, you can then burn to CD or load onto portable

media devices.

To install the software, insert the included CD into your computer, and follow

the on-screen instructions.

1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to connect Max LP's USB port to

an available USB port on your computer.

2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All Programs (Windows) or the

Applications menu (Mac).

3. Follow the on-screen instructions to set up your recording. When prompted to play your music, move Max LP's tonearm

over the record to start playback.

Note: To listen to a record while it's playing, listen through your computer's speakers, or connect Max LP's RCA outputs

to a stereo system or powered speakers. Max LP must be connected to the computer in order for EZ Vinyl/Tape

Converter to advance to the next step.

4. When you have finished recording, raise Max LP's tonearm from the record and return it to its arm clip.

Features

1. Platter – Place your record here.

2. Tonearm* – The tonearm can be raised and lowered by hand, or

by pressing the raise / lower lever. Please note that the tonearm

needs to be moved away from resting position (on the arm clip)

for the turntable motor to activate. When the tonearm is placed

back in its resting position, the turntable motor will deactivate if

Autostop has been turned on.

3. Arm Clip – This specially designed arm clip secures the tonearm

while at rest or when not in use. The arm clip has been designed

to remain in the up position while unlocked.

4. Raise / Lower Lever – Raises and lowers the tonearm.

5. 33 / 45 / 78 Switch – This switch controls the RPM of the

turntable platter. If the record is not playing at the correct speed,

see the Troubleshooting section for details on how to resolve

this.

6. 45 RPM Adapter Holder – Holds the included 45

RPM adapter. When not using the adapter, please

place it in this holder.

7. Autostop Switch – This switch turns autostop

on or off. When autostop is on, the platter will

start spinning when the tonearm is placed over

the record and stop spinning when the record

has reached the end. (When autostop is off,

the platter will always spin regardless of the

position of the tonearm.)

Note: If your vinyl record stops before it

reaches the end of the music, turn Autostop to

the off position for this particular record.

This is generally recommended for 45 RPM

records.

8. Headshell – ION headshell with stylus and ceramic cartridge. Remove the plastic cover off the stylus before playing a

record.

IMPORTANT: Remove the plastic cartridge cover

(needle cover) before operating the turntable.

Visit ionaudio.com/ezvc to download

the latest version of EZ Vinyl/Tape

Converter software or for helpful

troubleshooting guide and additional

support.

* IMPORTANT: A replacement cartridge/stylus can be

purchased by contacting the ION Audio Parts Dept. at

401-658-3743 (U.S.), emailing parts@ionaudio.com, or

by visiting ionaudio.com/products/accessories.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ion Max LP in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ion Max LP Manual

Product: